Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO
- Product Form
- pellets
- Product Code
- 1.06469
- Chemical Name
- Natriumhydroxide
Regulatory Identifiers
- CAS Number
- 1310-73-2 Check regulations →
- REACH No.
- 01-2119457892-27-XXXX
Identified Uses
Reagens voor analyse, Chemische productie
Manufacturers & Suppliers
Millipore
distributor
Merck Life Science BV/SRL
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Natriumhydroxid EC: 215-185-5 | 1310-73-2 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen), braken voorkomen. Onmiddellijk een arts waarschuwen. Niet proberen te neutraliseren.
Symptoms: perforatiegevaar
Immediate Medical Attention
Onmiddellijk een arts waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Natriumoxiden. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen. Vervuild oppervlak schoonmaken.
Related Products
Similar products with comparable safety profiles
Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS, Reag. Ph Eur, ISO
CAS: 1310-73-2
Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS, Reag. Ph Eur
---
Natriumhydroxide pellets voor analyse (max. 0.0002% K) EMSURE® ACS, Reag. Ph Eur
---
Kaliumhydroxide pellets voor analyse (max. 0.002% Na) EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 1310-58-3
Kaliumhydroxide pellets voor analyse (max. 0.05% Na) EMSURE® ACS, Reag. Ph Eur
CAS: 1310-58-3
Natriumhydroxide pellets voor analyse EMSURE®
CAS: 1310-73-2
Natriumhydroxide pellets voor analyse EMSURE®
CAS: 1310-73-2
Natriumhydroxide pellets voor analyse EMSURE®
CAS: 1310-73-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voor voorzorgsmaatregelen zie hoofdstuk 2.2
Goed afgesloten. Droog.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spat contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril
nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
Heftige reacties mogelijk met: Aceton, Chloor, Ethyleenoxide, Fluor, Waterstofhalogeniden, Hydrazinehydraat, hydroxylamine, Zuuranhydriden, acrolein, Zuurchloriden, Zuren, zwavelzuur, Chloroform, Water, waterstofperoxide, anhydriden, fosfiden, halogeen-halogeen verbindingen, trichlooretheen. Kan agressief ontleden in contact met: Organische stoffen, zwavelwaterstof. Kans op ontbranding of vorming van brandbare gassen of dampen met: Verpoederd aluminium, Ammoniumzouten, persulfaten, Natriumboorhydride, fosfor, Oxides van fosfor, Halogeneenkoolwaterstof, Lichte metalen, Metalen. Gevaar voor ontploffing/exotherme reactie met: Broom, Calcium (in poedervorm), Furfurylalcohol, Nitromethaan, Peroxiden, organische stikstofverbindingen, Nitrillen, Acrylmonomeren, Chloroform met Aceton, Nitrobenzeen met Methanol, Nitrobenzeen met zouten, magnesium, Zink en Tin (in aanwezigheid van zuurstof in de lucht en/of vochtigheid).
in aanwezigheid van zuurstof in de lucht en/of vochtigheid
Aceton, Chloor, Ethyleenoxide, Fluor, Waterstofhalogeniden, Hydrazinehydraat, hydroxylamine, Zuuranhydriden, acrolein, Zuurchloriden, Zuren, zwavelzuur, Chloroform, Water, waterstofperoxide, anhydriden, fosfiden, halogeen-halogeen verbindingen, trichlooretheen, Organische stoffen, zwavelwaterstof, Verpoederd aluminium, Ammoniumzouten, persulfaten, Natriumboorhydride, fosfor, Oxides van fosfor, Halogeneenkoolwaterstof, Lichte metalen, Metalen, Broom, Calcium (in poedervorm), Furfurylalcohol, Nitromethaan, Peroxiden, organische stikstofverbindingen, Nitrillen, Acrylmonomeren, Nitrobenzeen, Methanol, zouten, magnesium, Zink, Tin.
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1823
- Shipping Name
- NATRIUMHYDROXIDE, VAST
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO?
The signal word is danger.
What is the physical form of Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO?
Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO is a vast with wit color. It has reukloos odor.
What is Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO used for?
Reagens voor analyse, Chemische productie
What are the hazard statements for Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO?
This substance has 2 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
What is the melting point of Natriumhydroxide pellets voor analyse (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO?
The melting point is Smeltpunt: 318 °C and the boiling point is 1.390 °C bij 1.013 hPa.