NextSDS Logo
Safety Data Sheet NL

Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur

CAS 7664-38-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
Product Code
1.00573
Chemical Name
Orthofosforzuur

Regulatory Identifiers

CAS Number
7664-38-2 Check regulations →
REACH No.
Dit product is een mengsel. REACH registratienummer zie hoofdstuk 3.

Identified Uses

Reagens voor analyse, Chemische productie

Manufacturers & Suppliers

M

Millipore

national supplier

M

Merck Life Science BV/SRL

distributor

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 Kan bijtend zijn voor metalen.
H302 Schadelijk bij inslikken.
H314 Veroorzaakt ernstige brandwonden en oogletsel.

Precautionary Statements

P234 Uitsluitend in de oorspronkelijke verpakking bewaren.
P280 Draag beschermende handschoenen/ beschermende kleding/ oogbescherming/ gelaatsbescherming.
P301 + P312 NA INSLIKKEN: bij onwel voelen een ANTIGIFCENTRUM/ arts raadplegen.
P303 + P361 + P353 BIJ CONTACT MET DE HUID (of het haar): verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen.
P304 + P340 + P310 NA INADEMING: de persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen. Onmiddellijk een ANTIGIFCENTRUM/ arts raadplegen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Fosforzuur EC: 231-633-2 7664-38-2 70 - 90% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inademen: frisse lucht. Arts waarschuwen.

Skin contact

Na huidcontact: met ruim voldoende water afspoelen. Verontreinigde kleding verwijderen. Onmiddellijk een arts waarschuwen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen), braken voorkomen (perforatiegevaar!). Onmiddellijk een arts waarschuwen.

Immediate Medical Attention

Onmiddellijk een arts waarschuwen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.

Instructions

Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

Firefighter Protection

Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Dampen, aërosol niet inademen. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Met vloeistofabsorberend en neutraliserend matriaal opnemen. Reinig het getroffen oppervlak.

Materials: vloeistofabsorberend en neutraliserend matriaal (bijv. Chemizorb® H+, Merck Art. 101595)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voorzorgsmaatregelen op het etiket naleven. Voor voorzorgsmaatregelen zie hoofdstuk 2.2

Storage

Goed afgesloten. Aanbevolen bewaartemperatuur, zie productlabel.

Hygiene

Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal:KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal:KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Nauw aansluitende veiligheidsstofbril

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
vloeibaar
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
kleurloos
Colour Intensity
---
Form
---
Odor
reukloos
Odor Threshold
---
Ph
< 0,5 bij 100 g/l bij 20 °C
Melting Point
Smeltpunt: circa21 °C
Boiling Point
circa158 °C bij 1.013 hPa
Flash Point
niet ontvlambaar
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
2 hPa bij 20 °C
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,71 g cm3 bij 20 °C
Flammability
Geen gegevens beschikbaar
Upper Explosive Limit
Geen gegevens beschikbaar
Lower Explosive Limit
Geen gegevens beschikbaar
Explosive Limits
---
Auto Ignition Temperature
Geen gegevens beschikbaar
Decomposition Temperature
Geen gegevens beschikbaar
Solubility
---
Partition Coefficient
Geen gegevens beschikbaar
Solubility In Water
oplosbaar
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Geen gegevens beschikbaar
Kinematic Viscosity
30,5 mm2/s bij 20 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Geen gegevens beschikbaar

Reactivity

Geen gegevens beschikbaar

Hazardous reactions

Kans op ontbranding of vorming van brandbare gassen of dampen met: Metalen, metaallegeringen. Mogelijke vorming van: Waterstof. Heftige reacties mogelijk met: Basen, metaaloxiden.

Avoid

Geen gegevens beschikbaar

Incompatible

Aluminium, ijzer/ijzerhoudende verbindingen, Vloeistaal. Bij reactie met metalen komt waterstof vrij.

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
FOSFORZUUR, OPLOSSING
Transport Class
8
Packing Group
III
ADR

Tunnelrestrictiecode : (E)

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

The signal word is danger.

What is the physical form of Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a vloeibaar with kleurloos color. It has reukloos odor.

What is Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?

Reagens voor analyse, Chemische productie

What are the hazard statements for Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

This substance has 3 hazard statements:

  • H290: Kan bijtend zijn voor metalen.
  • H302: Schadelijk bij inslikken.
  • H314: Veroorzaakt ernstige brandwonden en oogletsel.

What is the melting point of Orthofosforzuur 85% voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

The melting point is Smeltpunt: circa21 °C and the boiling point is circa158 °C bij 1.013 hPa.