NextSDS Logo
Safety Data Sheet NL

1,4-Diazabicyclo[2.2.2]octaan

CAS 280-57-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1,4-Diazabicyclo[2.2.2]octaan
Product Code
D27802
Chemical Name
1,4-Diazabicyclo[2.2.2]octaan

Regulatory Identifiers

CAS Number
280-57-9 Check regulations →
REACH No.
01-2119980944-22-XXXX

Identified Uses

Laboratoriumchemikaliën, Vervaardiging van stoffen

Manufacturers & Suppliers

S

Sigma-Aldrich

M

Merck Life Science BV

distributor

Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Sol. Cat. 1 H228
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H228 Ontvlambare vaste stof.
H302 Schadelijk bij inslikken.
H315 Veroorzaakt huidirritatie.
H318 Veroorzaakt ernstig oogletsel.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P240 Opslag- en opvangreservoir aarden.
P280 Draag beschermende handschoenen/ beschermende kleding/ oogbescherming/ gelaatsbescherming.
P301 + P312 NA INSLIKKEN: bij onwel voelen een ANTIGIFCENTRUM/ arts raadplegen.
P302 + P352 BIJ CONTACT MET DE HUID: met veel water wassen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
1,4-di- azabicyclo[2.2.2]octaan EC: 205-999-9 280-57-9 90 - 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inhalatie: frisse lucht.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/afdouchen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Schuim, Kooldioxide (CO2), Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Brandbaar. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. Vormt ontplofbare mengsels met lucht bij sterke verhitting. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.

Instructions

Container uit gevaarzone weghalen en koelen met water. Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.

Firefighter Protection

Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Droog opnemen. Vervuild oppervlak schoonmaken.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen. Voorzorgsmaatregelen treffen tegen ontladingen van statische elektriciteit.

Storage

Goed afgesloten. Verwijderd houden van warmte en ontstekingsbronnen. Bewaar onder inert gas.

Hygiene

Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.

Fire prevention

Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Materiaal : Nitrilrubber, Doorbraaktijd : 480 min, Handschoendikte : 0,11 mm, Beschermingsindex : Volledig contact / Spad contact, Fabrikant : KCL 741 Dermatril® L. Opmerkingen : Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: : Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

Vlamvertragende, antistatische beschermingskleding.

Environmental

Product niet in de riolering laten komen. Risico op explosie.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
vast
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
wit
Colour Intensity
---
Form
kristallijn
Odor
Ammoniak geur
Odor Threshold
---
Ph
alkalisch Waterige oplossing
Melting Point
156 - 159 °C
Boiling Point
173,4 °C (1.000 hPa)
Flash Point
62,2 °C(1.013 hPa) Methode: ISO 1523, gesloten beker
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Geen gegevens beschikbaar
Vapor Pressure
0,43 hPa (23 °C) Methode: Richtlijn test OECD 104
Vapor Density
---
Relative Density
Geen gegevens beschikbaar
Bulk Density
---
Density
1,02 g/mL (25 °C)
Flammability
De stof of het mengsel is een brandbare vaste stof met de categorie 1. Methode: Verordening (EC) No. 440/2008, bijlage, A.10
Upper Explosive Limit
Geen gegevens beschikbaar
Lower Explosive Limit
Geen gegevens beschikbaar
Explosive Limits
---
Auto Ignition Temperature
350 °C
Decomposition Temperature
Geen gegevens beschikbaar
Solubility
---
Partition Coefficient
log Pow: -0,49 (20 °C) Methode: (berekend) (Lit.)
Solubility In Water
610 g/l (25 °C) pH: 7 oplosbaar
Solubility In Fat
---
Molecular Weight
112,17 g/mol
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Geen gegevens beschikbaar
Kinematic Viscosity
Geen gegevens beschikbaar
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).

Reactivity

Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt. Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.

Hazardous reactions

Heftige reacties mogelijk met: minerale zuren, Sterke oxidatiemiddelen, peroxiverbindingen, ijzer/ijzerhoudende verbindingen, zuren. Gevaar voor ontploffing met: waterstofperoxide

Avoid

Blootstelling aan vocht. Sterke verhitting.

Incompatible

Aluminium, IJzer, Koper, Zink

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1325
Shipping Name
BRANDBARE ORGANISCHE VASTE STOF, N.E.G. (1,4-di-azabicyclo[2.2.2]octaan)
Transport Class
4.1
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1,4-Diazabicyclo[2.2.2]octaan?

The signal word is danger.

What is the physical form of 1,4-Diazabicyclo[2.2.2]octaan?

1,4-Diazabicyclo[2.2.2]octaan is a vast with wit color. It has ammoniak geur odor.

What is 1,4-Diazabicyclo[2.2.2]octaan used for?

Laboratoriumchemikaliën, Vervaardiging van stoffen

What are the hazard statements for 1,4-Diazabicyclo[2.2.2]octaan?

This substance has 4 hazard statements:

  • H228: Ontvlambare vaste stof.
  • H302: Schadelijk bij inslikken.
  • H315: Veroorzaakt huidirritatie.
  • H318: Veroorzaakt ernstig oogletsel.

What is the melting point of 1,4-Diazabicyclo[2.2.2]octaan?

The melting point is 156 - 159 °C and the boiling point is 173,4 °C (1.000 hPa).