Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- S-Bond (Metallic Transparent)
- Product Code
- 15463; 15465
- Synonyms
- PROFESSIONAL ADHESIVE & SEALANT SYSTEM
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Afdichtmassa, Lijm. Uitsluitend voor gebruik door professionele gebruiker.
Uses advised against
Niet bekend.
Manufacturers & Suppliers
VEIDEC AB
manufacturer
Videvägen 9, SE-247 64 Veberöd, Suède
+46 46238900
http://www.veidec.com
VEIDEC BV
distributor
Markstraat 67, 1745 Opwijk, België
+32 52 35 52 82
http://www.veidec.be
AVEIDEC
Emergency Contacts
Antigifcentrum
+32 (0) 70 245 245
elke dag, 24 op 24 uur
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trimethoxyvinylsilaan EC: 220-449-8 | 2768-02-7 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij onwel voelen: Breng de persoon naar de frisse lucht.
Bij irritatie: Was het product eraf. Bij aanhoudende irritatie: Ga naar een arts.
Verwijder eventuele contactlenzen. Spoel de ogen direct uit met een ruime hoeveelheid water (20-30 °C) tot de irritatie ophoudt.
Veel water drinken. Neem direct contact op met de dokter als de persoon zich niet goed voelt en neem dit veiligheidsblad mee of het etiket van het product. Lok het braken, niet uit, behalve als de arts dat adviseert.
Immediate Medical Attention
Bij aanhoudende symptomen of twijfel over de toestand van het slachtoffer moet er een arts ingeschakeld worden. Neem direct contact op met de dokter als de persoon zich niet goed voelt.
Medical Treatment
Neem dit veiligheidsblad met of het etiket van het materiaal gegevens mee.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Geen bijzondere eisen.
Als het product wordt blootgesteld aan hoge temperaturen, bv. in situaties van brand, kunnen er gevaarlijke afbraakproducten ontstaan.
Firefighter Protection
Geen bijzondere eisen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet relevant
Gelekte/gemorste stof opruimen.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Niet eten, drinken of roken tijdens het gebruik van dit product.
Droog, koel en goed geventileerd
Niet eten, drinken of roken tijdens het gebruik van dit product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen bijzondere eisen.
In het geval van een lange blootstelling of hoge concentraties: Nitril handschoenen, 0,5 mm, > 480 min, EN374-2, EN374-3, EN388
Geen bijzondere bij normaal doelbewust gebruik.
Geen bijzondere bij normaal doelbewust gebruik.
Geen bijzondere bij normaal doelbewust gebruik
Geen bijzondere eisen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is stabiel onder de voorwaarden die genoemd zijn in de rubriek 7 "Hantering en opslag".
Er zijn geen bekende reactiviteitsgevaren verbonden met dit product.
Niet bekend.
Niet bekend.
Sterke zuren, sterke basen, sterke oxidatiemiddelen en sterke reductiemiddelen.
Geen onder normale omstandigheden.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is S-Bond (Metallic Transparent) known by?
S-Bond (Metallic Transparent) is also known as: PROFESSIONAL ADHESIVE & SEALANT SYSTEM
What is the hazard signal word for S-Bond (Metallic Transparent)?
The signal word is no signal word.
What is the physical form of S-Bond (Metallic Transparent)?
S-Bond (Metallic Transparent) is a pasta with doorzichtig, metallic color. It has karakteristiek odor.
What is S-Bond (Metallic Transparent) used for?
Afdichtmassa, Lijm. Uitsluitend voor gebruik door professionele gebruiker.
What is the melting point of S-Bond (Metallic Transparent)?
The melting point is Geen gegevens beschikbaar and the boiling point is Geen gegevens beschikbaar.