Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BRUNOX® Turbo-Spray® (AEROSOL)
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- H2M0-J01Q-R00E-PDXT
Identified Uses
Polijstmiddel, Corrosie-inhibitoren, Roestoplossingsmiddel, Smeermiddel / Smeerstoffen. Gebruikssector: SU3, SU21, SU22. Productcategorie: PC2, PC14, PC24. Procescategorie: PROC7, PROC11, PROC17, PROC18. Milieu-emissiecategorie: ERC4, ERC8a, ERC8d.
Manufacturers & Suppliers
BRUNOX Korrosionsschutz GmbH
manufacturer
Adlzreiterstrasse 13, 85051 Ingolstadt, Postfach 100127, 85001 Ingolstadt
+49/ (0) 841 961 29 04
http://www.brunox.de
BRUNOX AG
manufacturer
Tunnelstrasse 6, CH - 8732 Neuhaus/SG
+41/ (0)55 285 80 80
http://www.brunox.swiss
Emergency Contacts
Toxikologisches Informationszentrum
+41/ 044 251 51 51
Notruf - CH, STIZ
145
Giftnotrufzentrale
030 19240
EUROPÄISCHE NOTRUFNR.
112
Notruf - NL
+ 30 21 07 79 37 77
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| destillaten (aardolie), met waterstof behandelde lichte EC: 926-141-6 | 64742-47-8 | 50 - 100% | Yes |
| koolstofdioxide EC: 204-696-9 | 124-38-9 | 2.5 - 10% | Yes |
| sulfonic acids, petroleum, sodium salts | 68608-26-4 | 2.5 - 10% | Yes |
| butylstearaat EC: 204-666-5 | 123-95-5 | 2% | No |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Slachtoffer in de open lucht brengen en rustig neerleggen. Bij klachten medische behandeling inschakelen.
Ogen bij geopend ooglid meerdere minuten met stromend water spoelen.
Als de klachten niet minderen, een arts raadplegen.
Immediate Medical Attention
Bij inslikking of bij braken, gevaar voor indringing in de longen. Daarna observatie voor longontsteking en longoedeem.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Gebruik handschoenen uit stabiel materiaal (b.v. nitriel) - desgevallend met gebreide drager ter verbetering van het draagcomfort. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Op grond van falende testen kan geen aanbeveling voor handschoenmateriaal voor het product / de bereiding / het chemicalienmengsel afgegeven worden. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenmateriaal: Nitrilrubber. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. Doordringingstijd van het handschoenmateriaal: De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Niet noodzakelijk.
Filter A/P2, Filter AX
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- SPUITBUSSEN AEROSOLS AEROSOLS, flammable
- Transport Class
- 2.1
Waarschuwing: Gassen
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BRUNOX® Turbo-Spray® (AEROSOL)?
The signal word is warning.
What is the physical form of BRUNOX® Turbo-Spray® (AEROSOL)?
BRUNOX® Turbo-Spray® (AEROSOL) is a aërosol with helder color. It has karakteristiek odor.
What is the solubility of BRUNOX® Turbo-Spray® (AEROSOL)?
Niet resp. gering mengbaar.
What is BRUNOX® Turbo-Spray® (AEROSOL) used for?
Polijstmiddel, Corrosie-inhibitoren, Roestoplossingsmiddel, Smeermiddel / Smeerstoffen. Gebruikssector: SU3, SU21, SU22. Productcategorie: PC2, PC14, PC24. Procescategorie: PROC7, PROC11, PROC17, PROC18. Milieu-emissiecategorie: ERC4, ERC8a, ERC8d.
What are the hazard statements for BRUNOX® Turbo-Spray® (AEROSOL)?
This substance has 2 hazard statements:
- H223: Ontvlambaar aerosol.
- H229: Houder onder druk: kan open barsten bij verhitting.
What is the melting point of BRUNOX® Turbo-Spray® (AEROSOL)?
The melting point is -60 ℃ and the boiling point is 175 ℃.