NextSDS Logo
Safety Data Sheet NL

Pattex Hard PVC Lijm Gel

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Pattex Hard PVC Lijm Gel

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lijm voor buizen

Manufacturers & Suppliers

Henkel Nederland logo

Henkel Nederland

national supplier

Brugwal 11, 3431 NZ Nieuwegein, Nederland

+31 (60) 73 911

https://mysds.henkel.com/index.html#/appSelection

Emergency Contacts

Emergency Contact

+32 70 222 076

24 h

NVIC Nederland, Nationaal Vergiftigingen Informatie Centrum

088 755 8000

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H225 Licht ontvlambare vloeistof en damp.
H315 Veroorzaakt huidirritatie.
H318 Veroorzaakt ernstig oogletsel.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P271 Alleen buiten of in een goed geventileerde ruimte gebruiken.
P280 Beschermende handschoenen/oogbescherming dragen.
P305+P351+P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P310 Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen.
P501 Inhoud/verpakking afvoeren naar overeenkomstig de nationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butanon EC: 201-159-0 78-93-3 40 - 60% Yes
Cyclohexanon EC: 203-631-1 108-94-1 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht, bij aanhoudende klachten arts consulteren.

Symptoms: Dampen kunnen slaperigheid en duizeligheid veroorzaken.

Skin contact

spoelen onder stromend water met zeep. huidverzorging: Verontreinigde kleding onmiddellijk uittrekken.

Symptoms: Roodheid, ontsteking.

Eye contact

Direct onder stromend water spoelen (10 minuten lang), specialist consulteren.

Symptoms: corrosief, kan onomkeerbare oogletsels veroorzaken (verlies van het zicht)

Ingestion

Mondholte spoelen, geen braken opwekken, arts consulteren.

Immediate Medical Attention

Zie hoofdstuk: Beschrijving van de eerstehulpmaatregelen

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Aanbevolen worden handschoenen gemaakt van nitril rubber (materiaaldikte >0,1 mm, doorbraaktijd <30s). Handschoenen moeten vervangen worden na elk korte termijn contact of contaminatie. Beschikbaar bij labo gespecialiseerde handel of apotheek/chemie winkels. Bij een langer kontakt worden handschoenen uit butylrubber volgens EN 374 aanbevolen. materiaaldikte > 0,7 mm doorbraaktijd >240 min. Bij een langer en herhaald kontakt moet in het oog gehouden worden dat de bovengenoemde penetratietijd in de praktijk aanmerkelijk korter kan zijn dan in EN 374 beschreven. De beschermingshandschoenen moeten in elk geval tegen het arbeidsspecifiek gebruik bestand zijn (mechanische en thermische duurzaamheid, productaangepast, antistatisch etc). Bij eerste tekenen van sleet dienen ze direct vervangen te worden. De aanwijzingen van de fabrikant en veiligheidsrichtlijnen dienen steds nageleefd te worden. We raden een toepassingsgericht plan voor handbescherming op te stellen in samenwerking met de leverancier van de handschoenen en de beropsfederatie.

Eyes

Volledig sluitende veiligheidsbril. Oogbeschermingsmiddelen moeten conform zijn met EN 166.

Respiratory

Bij onvoldoende ventilatie een geschikt masker dragen. De filter van de combinatie: ABEKP (EN 14387) Deze aanbeveling dient gecheckt te worden met lokale voorwaarden.

Skin/Body

Geschikte veiligheidskleding Beschermende kledij moet conform zijn met EN 14605 voor vloeibare spatten en met EN 13982 voor stof.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
0,92 - 0,93 g/cm3 geen methode
Solubility In Fat
---
Flammability
ontvlambaar
Flash Point
-4 °℃ (24.8 ºF); DIN 51755 Closed cup flash point
Cloud Point
---
Boiling Point
79 °℃ (174.2 ºF)geen methode
Lower Explosive Limit
1,3 %(V); geen gegevens voorhanden
Colour Intensity
---
Properties Status
---
Partition Coefficient
---
Vapor Pressure
360 mbar
Odor Threshold
---
Crystallisation Point
---
Explosive Limits
---
Relative Evaporation Rate
---
Solubility In Water
gedeeltelijk oplosbaar
Physical State
vloeibaar
Voc Content
---
Auto Ignition Temperature
430 °℃ (806 ºF)
State Under Standard Conditions
---
Ph
Niet van toepassing, Product is niet oplosbaar (in water)
Molecular Weight
---
Softening Point
---
Dynamic Viscosity
6.500 - 18.000 mpa.s
Freezing Point
-31 ℃ (-23.8 ºF)
Colour
melkachtig wit
Decomposition Temperature
---
Appearance
melkachtig wit, troebel
Solubility
gedeeltelijk oplosbaar
Solidification Point
---
Metal Corrosion
---
Kinematic Viscosity
7.000 - 19.500 mm2/s
Vapor Density
---
Odor
Intens, naar oplosmiddel
Relative Density
---
Evaporation Rate
---
Physical State Data
liquid
Bulk Density
---
Melting Point
---
Upper Explosive Limit
12,6 %(V); geen gegevens voorhanden
Form
vloeistof
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
LIJMEN
Transport Class
3
Packing Group
II
ADR

Bijzondere bepaling 640D

IMDG

Niet van toepassing

IATA

Niet van toepassing

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Pattex Hard PVC Lijm Gel?

The signal word is danger.

What is the physical form of Pattex Hard PVC Lijm Gel?

Pattex Hard PVC Lijm Gel is a vloeibaar appearing as melkachtig wit, troebel with melkachtig wit color. It has intens, naar oplosmiddel odor.

What is the solubility of Pattex Hard PVC Lijm Gel?

gedeeltelijk oplosbaar

What is Pattex Hard PVC Lijm Gel used for?

Lijm voor buizen

What are the hazard statements for Pattex Hard PVC Lijm Gel?

This substance has 4 hazard statements:

  • H225: Licht ontvlambare vloeistof en damp.
  • H315: Veroorzaakt huidirritatie.
  • H318: Veroorzaakt ernstig oogletsel.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.