Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Protecton Poly .- Resin 1000g
- Product Code
- 402623-47alt
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Plamuur
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
NVIC
030-2748888
24 uur per dag
Belgisch Antigifcentrum
070 245 245
24 uur per dag
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Styrene EC: 202-851-5 | 100-42-5 | 25 - 50% | Yes |
| Metanol EC: 200-659-6 | 67-56-1 | 0.5% | Yes |
Het benzeen-gehalte (EINECS-Nr. 200-753-7) ligt in de afzonderlijke componenten onder de 0,1%.
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.
Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.
Medical Treatment
Geen verdere relevante informatie verkrijgbaar.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Handschoenen / bestand tegen oplosmiddelen. Op grond van ontbrekende testen kan geen aanbeveling voor handschoenmateriaal voor het product / de bereiding / het chemicaliënmengsel afgegeven worden. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenmateriaal: Natuurrubber (latex), Fluorrubber (Viton). De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. Doordringingstijd van het handschoenmateriaal: Butylrubber handschoenen met een dikte van 0.4 mm zijn bestand tegen: Aceton: 480 min, Butylacetaat: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Voor een langdurig contact in toepassingen zonder verhoogd verwondingsgevaar (b.v. laboratorium) zijn handschoenen uit volgend materiaal geschikt: Natuurrubber (latex).
Nauw aansluitende veiligheidsbril
Filter A/P2. Bij goede ventilatie niet noodzakelijk. Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3269
- Shipping Name
- POLYESTERHARS-KIT
- Transport Class
- 3
- Packing Group
- III
Waarschuwing: Brandbare vloeistoffen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Protecton Poly .- Resin 1000g?
The signal word is danger.
What is the physical form of Protecton Poly .- Resin 1000g?
Protecton Poly .- Resin 1000g is a vloeibaar appearing as volgens de produktbeschrijving with volgens de produktbeschrijving color. It has karakteristiek odor.
What is the solubility of Protecton Poly .- Resin 1000g?
Niet resp. gering mengbaar.
What is Protecton Poly .- Resin 1000g used for?
Plamuur
What are the hazard statements for Protecton Poly .- Resin 1000g?
This substance has 7 hazard statements:
- H226: Ontvlambare vloeistof en damp.
- H315: Veroorzaakt huidirritatie.
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H361: Wordt ervan verdacht het ongeboren kind te schaden.
- H372: Veroorzaakt schade aan de gehoororganen bij langdurige of herhaalde blootstelling.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of Protecton Poly .- Resin 1000g?
The melting point is Niet bepaald. and the boiling point is 145 ℃.