NextSDS Logo
Safety Data Sheet NL

MPM Antifreeze Concentrate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MPM Antifreeze Concentrate
Product Form
Mengsel
Product Code
82000

Regulatory Identifiers

CAS Number
N/A
UFI Code
M0WR-89NF-HM7J-M4C7

Identified Uses

Hoofdgebruik categorie : Professioneel gebruik, Consumentengebruik, Industrieel gebruik Spec. industrieel/professioneel gebruik : Geen wijdverbreid gebruik Gebruikt in gesloten systemen Gebruik van de stof of het mengsel : Antivriesmiddelen Gebruikscategorie : Antivriespreparaten

Uses advised against

Geen aanvullende informatie beschikbaar

Manufacturers & Suppliers

MPM International Oil Company BV logo

MPM International Oil Company BV

manufacturer

Cyclotronweg 1, 2629 HN Delft - Nederland

+31 (0)15 2514030

http://www.mpmoil.com

Emergency Contacts

Emergency Contact

+31 (0)15 2514030

08.00 - 17.00 GMT+1

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

+32 70 245 245

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

02 264 96 30

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 80 00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

STOT RE Cat. 2 H373

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Schadelijk bij inslikken.
H373 Kan schade aan organen (nieren) veroorzaken bij langdurige of herhaalde blootstelling (oraal).

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P260 Nevel, Damp niet inademen.
P264 Na het werken met dit product handen, onderarmen en gezicht grondig wassen.
P270 Niet eten, drinken of roken tijdens het gebruik van dit product.
P301+P312 NA INSLIKKEN: bij onwel voelen een ANTIGIFCENTRUM/arts raadplegen.
P330 De mond spoelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Contains 1,2 ethylene glycol and dinatrium sebacate.

Chemical Name CAS Number Concentration Hazardous
1,2 ethaandiol EC: 203-473-3 107-21-1 80 - 95% Yes
Dinatriumsebacaat EC: 241-300-3 17265-14-4 2% Yes

Bevat een kleine hoeveelheid Bitrex (> 25 ppm), ook bekend als Denatonium Benzoate. Meer informatie onder sectie 11.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij ademhalingsmoeilijkheden het slachtoffer in de frisse lucht brengen en laten rusten in een houding die het ademen vergemakkelijkt.

Symptoms: Schadelijk bij inademing.

Skin contact

De besmette kleding uittrekken, de blootgestelde huid wassen met milde zeep en water en vervolgens afspoelen met warm water. Bij huidirritatie of uitslag: een arts raadplegen.

Symptoms: Kan huidirritatie / dermatitis veroorzaken.

Eye contact

BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen. Indien de irritatie aanhoudt, een oogarts raadplegen.

Symptoms: Veroorzaakt irritatie van de ogen.

Ingestion

GEEN braken opwekken. Indien de patiënt bij volle bewustzijn is, veel water laten drinken. Iemand die bewusteloos is nooit iets te drinken geven. Onmiddellijk een arts raadplegen.

Symptoms: Schadelijk bij inslikken.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorg voor een goede ventilatie van de werkplek.

Hands

Beschermende handschoenen

Eyes

Onder normale gebruiksomstandigheden wordt geen speciale oogbescherming aanbevolen. Oogbescherming is enkel nodig wanneer hete vloeistof kan opspatten of verstuiven

Respiratory

Bij ontoereikende ventilatie een geschikt ademhalingsapparaat gebruiken

Skin/Body

Onder normale gebruiksomstandigheden wordt geen speciale kleding/huidbescherming aanbevolen

Environmental

Voorkom lozing in het milieu.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
Oplosbaar in water.
Physical State
Vloeibaar.
Kinematic Viscosity
Niet bepaald.
Appearance
Hygroscopisch.
Decomposition Temperature
Niet beschikbaar
Vapor Pressure
Niet beschikbaar
Melting Point
Niet beschikbaar
Cloud Point
---
Lower Explosive Limit
Niet beschikbaar
Solubility
Het product is oplosbaar in water.
Dynamic Viscosity
---
Physical State Data
liquid
Voc Content
---
Form
---
Odor Threshold
Niet beschikbaar
Relative Evaporation Rate
---
Solubility In Fat
---
Colour
Blauw.
Metal Corrosion
---
Flash Point
> 150 ℃
Vapor Density
---
Upper Explosive Limit
Niet beschikbaar
Relative Density
Niet beschikbaar
Properties Status
---
Crystallisation Point
---
Evaporation Rate
---
Ph
Niet beschikbaar
Partition Coefficient
Niet beschikbaar
Bulk Density
---
State Under Standard Conditions
---
Density
1119 kg/m3 @ 20℃
Boiling Point
Niet beschikbaar
Auto Ignition Temperature
Niet beschikbaar
Solidification Point
---
Colour Intensity
---
Explosive Limits
---
Flammability
Niet beschikbaar
Freezing Point
- 11
Softening Point
---
Molecular Weight
---
Odor
Licht.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Niet gereglementeerd
Shipping Name
Niet gereglementeerd
Transport Class
Niet gereglementeerd
Packing Group
Niet gereglementeerd
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MPM Antifreeze Concentrate?

The signal word is warning.

What is the physical form of MPM Antifreeze Concentrate?

MPM Antifreeze Concentrate is a vloeibaar. appearing as hygroscopisch. with blauw. color. It has licht. odor.

What is the solubility of MPM Antifreeze Concentrate?

Het product is oplosbaar in water.

What is MPM Antifreeze Concentrate used for?

Hoofdgebruik categorie : Professioneel gebruik, Consumentengebruik, Industrieel gebruik Spec. industrieel/professioneel gebruik : Geen wijdverbreid gebruik Gebruikt in gesloten systemen Gebruik van de stof of het mengsel : Antivriesmiddelen Gebruikscategorie : Antivriespreparaten

What are the hazard statements for MPM Antifreeze Concentrate?

This substance has 2 hazard statements:

  • H302: Schadelijk bij inslikken.
  • H373: Kan schade aan organen (nieren) veroorzaken bij langdurige of herhaalde blootstelling (oraal).

What is the melting point of MPM Antifreeze Concentrate?

The melting point is Niet beschikbaar and the boiling point is Niet beschikbaar.