Brekutex M, Gebinde

Remove to fresh air. If symptoms persist, consult a doctor. In case of unconsciousness keep in recovery position, seek medical advice.

Wash off immediately with soap and plenty of water. If skin irritation continues seek medical advice.

Symptoms: Dries out skin.

After eye contact rinse immediately with plenty of water and seek medical advice.

Do not induce vomiting – seek immediately medical advice.

Extinguishing powder, foam, CO₂ or water spray jet.

High volume water jet.

Vapors are heavier than air and may spread along floors. Flash back possible over considerable distance. Vapors can form explosive mixtures with air.

Use personal protective equipment. Ensure sufficient ventilation. Keep away from heat and sources of ignition. Avoid contact with eyes and skin. Do not inhale gas/fume/vapor/aerosol.

Do not allow product to reach surface water and sanitary sewer system. Avoid subsoil penetration.

Absorb with liquid-binding material

Materials: sand, diatomite, acid- /universal binder

Keep container tightly closed. Avoid inhalation of vapor and spray mist. Ensure sufficient air exchange or exhaustion at the workplace.

Keep container in an area equipped with solvent-resistant floor. Keep container tightly closed and in a dry, cool and well ventilated place. Protect against heat.

Keep away from sources of ignition – No smoking. Take precautionary measures against static discharge.

No further data; see item 7.

Solvent-resistant protective gloves. The glove material has to be impermeable and resistant to the product / the substances / the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation / the chemical mixture. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application. Penetration time of the glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

Tightly sealed goggles.

In case of brief exposure or low pollution use breathing filter apparatus, in case of longer and intensive exposure use protective respirator with independent air supply (self-contained breathing apparatus): Recommended filter type: A.

Impermeable, protective clothing.

Heat, flames and sparks.

Strong oxidizing agents.

No decomposition if used and stored according to specifications and regulations.

Can be disposed as solid waste observing the local official regulations or burnt in a suitable waste incinerating plant