NextSDS Logo
Safety Data Sheet EN

Copper(II) sulfate

CAS 7758-98-7
EC 231-847-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Copper(II) sulfate
Product Code
35779
Chemical Name
copper sulphate 029-004-00-0

Regulatory Identifiers

CAS Number
7758-98-7 Check regulations →
EC Number
231-847-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Emergency Contact

Carechem

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362 Take off contaminated clothing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/ ... /if you feel unwell.
P321 Specific treatment (see on this label).
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Copper(II) sulfate

Chemical Name CAS Number Concentration Hazardous
copper sulphate 029-004-00-0 EC: 231-847-6 7758-98-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness 0.11 mm.

Eyes

Safety glasses.

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
Not determined.
Auto Ignition Temperature
Not determined.
Vapor Pressure
Not applicable.
Boiling Point
Not determined
Density
3.6 g/cm3 (30.042 lbs/gal)
Kinematic Viscosity
Not applicable.
Solubility In Water
203 g/l
Solidification Point
---
Voc Content
---
Colour Intensity
---
Flammability
Not determined.
Vapor Density
Not applicable.
Evaporation Rate
Not applicable.
State Under Standard Conditions
---
Partition Coefficient
Not determined.
Bulk Density
---
Properties Status
---
Odor Threshold
Not determined.
Molecular Weight
---
Lower Explosive Limit
Not determined
Odor
Odorless
Flash Point
---
Softening Point
---
Explosive Limits
---
Physical State Data
solid
Decomposition Temperature
Not determined
Physical State
Powder
Solubility In Fat
---
Cloud Point
---
Dynamic Viscosity
Not applicable.
Colour
Pale grey
Solubility
---
Crystallisation Point
---
Upper Explosive Limit
Not determined
Freezing Point
---
Form
Powder
Appearance
Powder
Metal Corrosion
---
Ph
Not applicable.
Melting Point
>560 °℃ (>1040 °F) (dec)
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3288
Shipping Name
RQ Toxic solid, inorganic, n.o.s. (Copper(II) sulfate)
Transport Class
6.1
Packing Group
III
IMDG

F-A,S-Ă

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Copper(II) sulfate?

The signal word is warning.

What is the physical form of Copper(II) sulfate?

Copper(II) sulfate is a powder appearing as powder with pale grey color. It has odorless odor.

What is Copper(II) sulfate used for?

SU24 Scientific research and development

What are the hazard statements for Copper(II) sulfate?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Copper(II) sulfate?

The melting point is >560 °℃ (>1040 °F) (dec) and the boiling point is Not determined.

Compliance Scanner

Scan your compliance