NextSDS Logo
Safety Data Sheet EN

Copper(II) sulfate pentahydrate

CAS 7758-99-8
EC 231-847-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Copper(II) sulfate pentahydrate
Product Code
14178
Chemical Name
copper sulphate pentahydrate 029-023-00-4

Regulatory Identifiers

CAS Number
7758-99-8 Check regulations →
EC Number
231-847-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

866-928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS06 - Acute toxicity

GHS06

Hazard Statements

H301 Toxic if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Copper(II) sulfate pentahydrate

Chemical Name CAS Number Concentration Hazardous
Copper(II) sulfate pentahydrate EC: 231-847-6 7758-99-8 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms: Causes skin irritation.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Seek medical treatment.

Symptoms: Toxic if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness 0.11 mm.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
---
Physical State Data
---
State Under Standard Conditions
---
Appearance
---
Colour
---
Colour Intensity
---
Form
Crystalline
Odor
Odorless
Odor Threshold
Not determined.
Ph
4
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
Not applicable.
Vapor Density
Not applicable.
Relative Density
Not determined.
Bulk Density
---
Density
2.27 g/cm (18.943 lbs/gal)
Flammability
Not determined.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined
Solubility
Soluble
Partition Coefficient
Not determined.
Solubility In Water
317 g/l
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable.
Kinematic Viscosity
Not applicable.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3288
Shipping Name
Toxic solid, inorganic, n.o.s. (Copper(II) sulfate pentahydrate)
Transport Class
6.1
Packing Group
III
ADR

Warning: Toxic substances F-A,S-Ă

IMDG

Warning: Toxic substances F-A,S-Ă

IATA

Warning: Toxic substances F-A,S-Ă

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Copper(II) sulfate pentahydrate?

The signal word is danger.

What is the solubility of Copper(II) sulfate pentahydrate?

Soluble

What is Copper(II) sulfate pentahydrate used for?

SU24 Scientific research and development

What are the hazard statements for Copper(II) sulfate pentahydrate?

This substance has 3 hazard statements:

  • H301: Toxic if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Copper(II) sulfate pentahydrate?

The melting point is Not determined and the boiling point is Not determined.

Compliance Scanner

Scan your compliance