NextSDS Logo
Safety Data Sheet EN

Benzalkonium chloride

CAS 63449-41-2
EC 264-151-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Benzalkonium chloride
Product Code
41339

Regulatory Identifiers

CAS Number
63449-41-2 Check regulations →
EC Number
264-151-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H312

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H302 + H312 Harmful if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
Benzalkonium chloride EC: 264-151-6 63449-41-2 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Immediate Medical Attention

Seek immediate medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Nitrogen oxides (NOx), Possibly Hydrogen cyanide (HCN), Hydrogen chloride (HCl)

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental

Do not allow material to be released to the environment without proper governmental permits.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed. Ensure good ventilation at the workplace.

Storage

Store in cool, dry place in tightly closed containers. Keep container tightly sealed. Store in cool, dry conditions in well sealed containers.

Fire prevention

No information known.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Tightly sealed goggles. Full face protection

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
Odorless
Solidification Point
---
Upper Explosive Limit
Not determined
Decomposition Temperature
Not determined
Odor Threshold
Not determined.
Vapor Density
Not applicable.
Bulk Density
---
Softening Point
---
Flash Point
Not applicable
Density
Not determined
Dynamic Viscosity
Not applicable.
Freezing Point
---
Partition Coefficient
Not determined.
Vapor Pressure
Not applicable.
Voc Content
---
Colour Intensity
---
Crystallisation Point
---
Melting Point
Not determined
Flammability
Not determined.
Solubility In Fat
---
Physical State Data
solid
Explosive Limits
---
Kinematic Viscosity
Not applicable.
Solubility In Water
4000 g/l
Form
Low melting solid
Auto Ignition Temperature
Not determined
Molecular Weight
---
Relative Density
Not determined.
Relative Evaporation Rate
---
Metal Corrosion
---
Evaporation Rate
Not applicable.
Lower Explosive Limit
Not determined
Ph
Not applicable.
Colour
Light yellow
State Under Standard Conditions
---
Properties Status
---
Boiling Point
Not determined
Physical State
Low melting solid
Cloud Point
---
Solubility
Soluble
Appearance
Low melting solid, Light yellow
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

No dangerous reactions known

Avoid

No further relevant information available.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide, Nitrogen oxides, Hydrogen cyanide, Possibly Hydrogen cyanide (HCN)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2923
Shipping Name
Corrosive solids, toxic, n.o.s. (Benzalkonium chloride)
Transport Class
8 (6.1)
Packing Group
III
ADR

Warning: Corrosive substances

IMDG

Warning: Corrosive substances

IATA

Warning: Corrosive substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Benzalkonium chloride?

The signal word is danger.

What is the physical form of Benzalkonium chloride?

Benzalkonium chloride is a low melting solid appearing as low melting solid, light yellow with light yellow color. It has odorless odor.

What is the solubility of Benzalkonium chloride?

Soluble

What is Benzalkonium chloride used for?

SU24 Scientific research and development

What are the hazard statements for Benzalkonium chloride?

This substance has 2 hazard statements:

  • H302 + H312: Harmful if swallowed or in contact with skin.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Benzalkonium chloride?

The melting point is Not determined and the boiling point is Not determined.