NextSDS Logo
Safety Data Sheet EN

Barium acetate

CAS 543-80-6
EC 208-849-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Barium acetate
Product Code
11126

Regulatory Identifiers

CAS Number
543-80-6 Check regulations →
EC Number
208-849-0 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H332

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 + H332 Harmful if swallowed or if inhaled.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Barium acetate EC: 208-849-0 543-80-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Harmful if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

Immediate Medical Attention

Seek immediate medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Barium oxide

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.

Environmental

Do not allow product to reach sewage system or any water course.

Cleanup methods

Dispose of contaminated material as waste according to section 13.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed. Ensure good ventilation at the workplace.

Storage

Store in cool, dry place in tightly closed containers.

Fire prevention

No information known.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material (in minutes): 480. Glove thickness: 0.11 mm.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not applicable.
Relative Evaporation Rate
---
Bulk Density
---
Flammability
Not determined.
Ph
Not applicable.
Dynamic Viscosity
Not applicable.
Physical State Data
solid
Kinematic Viscosity
Not applicable.
Flash Point
---
Upper Explosive Limit
Not determined
Form
Crystalline
Freezing Point
---
Appearance
Crystalline
Relative Density
Not determined.
Boiling Point
Not determined
Vapor Pressure
Not applicable.
Metal Corrosion
---
Decomposition Temperature
Not determined
Cloud Point
---
Voc Content
---
State Under Standard Conditions
---
Explosive Limits
---
Crystallisation Point
---
Softening Point
---
Odor
Odorless
Molecular Weight
---
Properties Status
---
Colour Intensity
---
Physical State
Crystalline
Density
2.47 g/cm³ (20.612 lbs/gal)
Solubility In Fat
---
Odor Threshold
Not determined.
Partition Coefficient
Not determined.
Solidification Point
---
Auto Ignition Temperature
Not determined
Vapor Density
Not applicable.
Melting Point
Not determined
Solubility
---
Solubility In Water
588 g/l
Colour
---
Lower Explosive Limit
Not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

Reacts with strong oxidizing agents

Avoid

No further relevant information available.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide, Barium oxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1564
Shipping Name
Barium compounds, n.o.s.
Transport Class
6.1
Packing Group
III
IMDG

Warning: Toxic substances

IATA

Warning: Toxic substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Barium acetate?

The signal word is warning.

What is the physical form of Barium acetate?

Barium acetate is a crystalline appearing as crystalline . It has odorless odor.

What is Barium acetate used for?

SU24 Scientific research and development

What are the hazard statements for Barium acetate?

This substance has 1 hazard statement:

  • H302 + H332: Harmful if swallowed or if inhaled.

What is the melting point of Barium acetate?

The melting point is Not determined and the boiling point is Not determined.