Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Hydroxyethyl methacrylate
- Product Code
- 477028
- Chemical Name
- 2-Hydroxyethyl methacrylate
Regulatory Identifiers
- CAS Number
- 868-77-9 Check regulations →
Identified Uses
Laboratory chemicals, Synthesis of substances
Uses advised against
The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.
Manufacturers & Suppliers
Sigma-Aldrich Inc.
manufacturer
3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES
+1 314 771-5765
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-hydroxyethyl methacrylate EC: 212-782-2 | 868-77-9 | 100% | Yes |
| ethylene glycol dimethacrylate | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon oxides. Combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No data available
No data available
Related Products
Similar products with comparable safety profiles
2-Hydroxyethyl methacrylate
CAS: 868-77-9
2-Hydroxyethyl methacrylate
---
2-Hydroxyethyl acrylate
CAS: 818-61-1
2-Ethylhexyl methacrylate
CAS: 688-84-6
2-(Dimethylamino)ethyl methacrylate
CAS: 2867-47-2
2-Hydroxyethyl acrylate, stabilized
CAS: 818-61-1
Ethyl methacrylate
CAS: 97-63-2
N-Hydroxyethyl acrylamide
CAS: 7646-67-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
No data available
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Chloroprene, Minimum layer thickness: 0.65 mm, Break through time: 480 min, Material tested: KCL 720 Camapren®. Splash contact: Material: Latex gloves, Minimum layer thickness: 0.6 mm, Break through time: 10 min, Material tested: Lapren® (KCL 706 / Aldrich Z677558, Size M). Recommendations apply to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves.
Recommended Filter type: Filter A-(P2). Required when vapours/aerosols are generated. Recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
Violent reactions possible with: Amines, peroxi compounds, polymerisation initiators
Exposure to moisture. Heat. Light.
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
No data available
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-Hydroxyethyl methacrylate?
The signal word is warning.
What is the physical form of 2-Hydroxyethyl methacrylate?
2-Hydroxyethyl methacrylate is a clear, liquid appearing as clear, liquid with colorless color. It has ester-like odor.
What is 2-Hydroxyethyl methacrylate used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for 2-Hydroxyethyl methacrylate?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
What is the melting point of 2-Hydroxyethyl methacrylate?
The melting point is -12 °C (10 °F) and the boiling point is 67 °C 153 °F at 4.7 hPa.