Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Chloroacetaldehyde, 40-45% Aqueous Solution
- Product Form
- Aqueous Solution
- Product Code
- 19732
- Chemical Name
- Chloroacetaldehyde
Regulatory Identifiers
- CAS Number
- 107-20-0 Check regulations →
- EC Number
- 203-472-8 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
After normal business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Chloroacetaldehyde EC: 203-472-8 | 107-20-0 | 40 - 45% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms: Causes severe skin burns.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: Causes serious eye damage.
Do not induce vomiting; immediately call for medical help.
Immediate Medical Attention
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Hydrogen chloride (HCl)
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow material to be released to the environment without proper governmental permits.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly sealed. Open and handle container with care.
Store in cool, dry place in tightly closed containers. Keep container tightly sealed.
Keep ignition sources away.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.
Tightly sealed goggles. Full face protection.
Use self-contained respiratory protective device in emergency situations.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Water reacts violently with alkali metals. Reacts with alkaline earth metals. Water reacts with many metals to give hydrogen, often violently. Water is also incompatible with many reactive organic and inorganic chemicals.
Decomposition will not occur if used and stored according to specifications. No further relevant information available.
Bases
Carbon monoxide and carbon dioxide Hydrogen chloride (HCl)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2232
- Shipping Name
- 2-Chloroethanal
- Transport Class
- 6.1
- Packing Group
- I
Warning: Toxic substances
Warning: Toxic substances
Warning: Toxic substances
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Chloroacetaldehyde, 40-45% Aqueous Solution?
The signal word is danger.
What is the physical form of Chloroacetaldehyde, 40-45% Aqueous Solution?
Chloroacetaldehyde, 40-45% Aqueous Solution is a liquid appearing as colorless with colorless color. It has pungent odor.
What is the solubility of Chloroacetaldehyde, 40-45% Aqueous Solution?
Fully miscible
What is Chloroacetaldehyde, 40-45% Aqueous Solution used for?
SU24 Scientific research and development
What are the hazard statements for Chloroacetaldehyde, 40-45% Aqueous Solution?
This substance has 5 hazard statements:
- H227: Combustible liquid.
- H301 + H311: Toxic if swallowed or in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H330: Fatal if inhaled.
- H351: Suspected of causing cancer.
What is the melting point of Chloroacetaldehyde, 40-45% Aqueous Solution?
The melting point is Not determined and the boiling point is Not determined.