Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- tert-Butyl methyl ether
- Product Code
- 40477
- Chemical Name
- MTBE (methyl tert-butyl ether)
- Synonyms
- tert-butylmethylether
Regulatory Identifiers
- CAS Number
- 1634-04-4 Check regulations →
- EC Number
- 216-653-1 Check regulations →
- REACH No.
- 01-2119452786-27-0001
Identified Uses
SU24 Scientific research and development
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
800-343-0660
During normal business hours (Monday-Friday, 8am-7pm EST)
Carechem 24
866-928-0789
After normal business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterization: Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MTBE (methyl tert-butyl ether) EC: 216-653-1 | 1634-04-4 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Causes skin irritation.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) Not determined.
Safety glasses with side shields / NIOSH (US) or EN 166(EU)
Use suitable respirator when high concentrations are present. Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type AXBEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2350
- Shipping Name
- Butyl methyl ether
- Transport Class
- 8
- Packing Group
- II
Warning: Flammable liquids
Warning: Flammable liquids
Warning: Flammable liquids
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is tert-Butyl methyl ether known by?
tert-Butyl methyl ether is also known as: tert-butylmethylether
What is the hazard signal word for tert-Butyl methyl ether?
The signal word is danger.
What is the physical form of tert-Butyl methyl ether?
tert-Butyl methyl ether is a liquid appearing as mild .
What is tert-Butyl methyl ether used for?
SU24 Scientific research and development
What are the hazard statements for tert-Butyl methyl ether?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapor.
- H315: Causes skin irritation.
What is the melting point of tert-Butyl methyl ether?
The melting point is -109 °℃ (-164 °F) and the boiling point is 55-56 ℃ (131-133 ºF).