NextSDS Logo
Safety Data Sheet EN

Cyclohexanone

CAS 108-94-1
EC 203-631-1

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cyclohexanone
Product Code
A15607
Chemical Name
CYCLO-HEXANONE
Synonyms
Cyclohexanone

Regulatory Identifiers

CAS Number
108-94-1 Check regulations →
EC Number
203-631-1 Check regulations →
REACH No.
01-2119453616-35-0003

Identified Uses

SU24 Scientific research and development

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H312
Acute Tox. Cat. 4 H332
Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H226 Flammable liquid and vapor.
H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
CYCLO-HEXANONE EC: 203-631-1 108-94-1 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Symptoms: Harmful if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms: Causes skin irritation.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.3 mm.

Eyes

Tightly sealed goggles. Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Upper Explosive Limit
9.4 Vol %
Vapor Density
Not determined.
State Under Standard Conditions
---
Partition Coefficient
---
Boiling Point
154-156 ℃ (309-313 ºF)
Solidification Point
---
Melting Point
-26 ℃ (-15 °F)
Solubility
80 g/l
Ph
Not determined.
Bulk Density
---
Solubility In Fat
---
Properties Status
---
Metal Corrosion
---
Molecular Weight
---
Form
Liquid
Appearance
Not determined
Dynamic Viscosity
Not determined.
Physical State Data
liquid
Colour Intensity
---
Voc Content
---
Relative Evaporation Rate
---
Odor Threshold
Not determined.
Evaporation Rate
Not determined.
Relative Density
Not determined.
Freezing Point
---
Kinematic Viscosity
Not determined.
Colour
---
Vapor Pressure
4.5 hPa (3 mm Hg)
Flash Point
47 °℃ (117 ºF)
Odor
Not determined
Lower Explosive Limit
1.3 Vol %
Physical State
Liquid
Decomposition Temperature
Not determined
Flammability
Not determined.
Density
0.948 g/cm3 (7.911 lbs/gal)
Auto Ignition Temperature
420 °℃ (788 °F)
Explosive Limits
---
Softening Point
---
Crystallisation Point
---
Solubility In Water
80 g/l
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1915
Shipping Name
Cyclohexanone
Transport Class
8
Packing Group
III
ADR

Warning: Flammable liquids F-E,S-Ď A

IMDG

Warning: Flammable liquids F-E,S-Ď A

IATA

Warning: Flammable liquids F-E,S-Ď A

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Cyclohexanone known by?

Cyclohexanone is also known as: Cyclohexanone

What is the hazard signal word for Cyclohexanone?

The signal word is danger.

What is the physical form of Cyclohexanone?

Cyclohexanone is a liquid appearing as not determined . It has not determined odor.

What is the solubility of Cyclohexanone?

80 g/l

What is Cyclohexanone used for?

SU24 Scientific research and development

What are the hazard statements for Cyclohexanone?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapor.
  • H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of Cyclohexanone?

The melting point is -26 ℃ (-15 °F) and the boiling point is 154-156 ℃ (309-313 ºF).

Compliance Scanner

Scan your compliance