NextSDS Logo
Safety Data Sheet EN

Sulfanilic acid

CAS 121-57-3
EC 204-482-5

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sulfanilic acid
Product Code
41540
Chemical Name
sulphanilic acid 4-aminobenzenesulphonic acid 612-014-00-X

Regulatory Identifiers

CAS Number
121-57-3 Check regulations →
EC Number
204-482-5 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

866-928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
sulphanilic acid 4-aminobenzenesulphonic acid 612-014-00-X EC: 204-482-5 121-57-3 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes skin irritation.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness 0.11 mm.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Solubility In Water
10 g/l
Decomposition Temperature
Not determined.
Partition Coefficient
Not determined.
Bulk Density
---
Cloud Point
---
Odor
Odorless
Appearance
Crystalline powder
Vapor Pressure
Not applicable.
State Under Standard Conditions
---
Flammability
Not determined.
Dynamic Viscosity
Not applicable.
Upper Explosive Limit
Not determined
Ph
Not applicable.
Vapor Density
Not applicable.
Voc Content
---
Metal Corrosion
---
Physical State Data
---
Solidification Point
---
Relative Density
Not determined.
Physical State
---
Lower Explosive Limit
Not determined
Freezing Point
---
Auto Ignition Temperature
Not determined.
Density
1.485 g/cm3 (12.392 lbs/gal)
Relative Evaporation Rate
---
Molecular Weight
---
Form
---
Boiling Point
Not determined
Kinematic Viscosity
Not applicable.
Odor Threshold
Not determined.
Flash Point
---
Colour
---
Melting Point
ca 365 °C (ca 689 ºF)
Solubility
---
Colour Intensity
---
Explosive Limits
---
Solubility In Fat
---
Evaporation Rate
Not applicable.
Properties Status
---
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sulfanilic acid?

The signal word is warning.

What is Sulfanilic acid used for?

SU24 Scientific research and development

What are the hazard statements for Sulfanilic acid?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H317: May cause an allergic skin reaction.

What is the melting point of Sulfanilic acid?

The melting point is ca 365 °C (ca 689 ºF) and the boiling point is Not determined.

Compliance Scanner

Scan your compliance