NextSDS Logo
Safety Data Sheet EN

Lithium carbonate, Puratronic®

CAS 554-13-2
EC 209-062-5

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lithium carbonate, Puratronic®
Product Code
10734
Chemical Name
Lithium carbonate

Regulatory Identifiers

CAS Number
554-13-2 Check regulations →
EC Number
209-062-5 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street Ward Hill, MA 01835-8099

www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash thoroughly after handling.
P280 Wear eye protection / face protection.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
N/A --- 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
1310 ℃ (2390 °F) (dec)
State Under Standard Conditions
---
Evaporation Rate
Not applicable.
Metal Corrosion
---
Relative Evaporation Rate
---
Vapor Density
Not applicable.
Colour
---
Solubility
---
Freezing Point
---
Softening Point
---
Odor
Odorless
Odor Threshold
Not determined.
Explosive Limits
---
Molecular Weight
---
Vapor Pressure
Not applicable.
Upper Explosive Limit
Not determined
Appearance
---
Properties Status
---
Partition Coefficient
Not determined.
Bulk Density
---
Crystallisation Point
---
Auto Ignition Temperature
Not determined.
Kinematic Viscosity
Not applicable.
Voc Content
---
Density
2.11 g/cm3 (17.608 lbs/gal)
Flammability
Not determined.
Physical State
---
Ph
10-11.5
Melting Point
723 °C (1333 ºF)
Relative Density
Not determined.
Solidification Point
---
Cloud Point
---
Solubility In Fat
---
Lower Explosive Limit
Not determined
Decomposition Temperature
Not determined
Physical State Data
solid
Colour Intensity
---
Form
Crystalline or powder
Dynamic Viscosity
Not applicable.
Flash Point
---
Solubility In Water
13 g/l
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lithium carbonate, Puratronic®?

The signal word is warning.

What is Lithium carbonate, Puratronic® used for?

SU24 Scientific research and development

What are the hazard statements for Lithium carbonate, Puratronic®?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.

What is the melting point of Lithium carbonate, Puratronic®?

The melting point is 723 °C (1333 ºF) and the boiling point is 1310 ℃ (2390 °F) (dec).

Compliance Scanner

Scan your compliance