NextSDS Logo
Safety Data Sheet EN

N,N-Dimethylacetamide

CAS 127-19-5
EC 204-826-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N,N-Dimethylacetamide
Product Code
22916
Chemical Name
N,N-Dimethylacetamide

Regulatory Identifiers

CAS Number
127-19-5 Check regulations →
EC Number
204-826-4 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Repr. Cat. 1B H360
Acute Tox. Cat. 4 H312
Acute Tox. Cat. 4 H332
Flam. Liq. Cat. 4 H227

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H227 Combustible liquid.
H312 + H332 Harmful in contact with skin or if inhaled.
H360 May damage fertility or the unborn child.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from flames and hot surfaces. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
N,N-Dimethylacetamide 127-19-5 100% No

(Contd. on page 2) USA

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Symptoms: Harmful if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms: Harmful in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.3 mm

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
165-166 °C (329-331 °F)
Colour Intensity
---
Odor
Ammonia-like
Softening Point
---
Relative Density
Not determined.
Vapor Pressure
3.3 hPa (2 mm Hg)
Colour
---
Solidification Point
---
Solubility In Fat
---
Flash Point
70 °C (158 °F)
Freezing Point
---
Evaporation Rate
Not determined.
Solubility
Fully miscible
Dynamic Viscosity
Not determined.
Voc Content
---
Vapor Density
Not determined.
Partition Coefficient
Not determined.
Upper Explosive Limit
11.5 Vol %
State Under Standard Conditions
---
Form
Liquid
Cloud Point
---
Physical State
Liquid
Explosive Limits
---
Relative Evaporation Rate
---
Solubility In Water
Fully miscible
Auto Ignition Temperature
390 °C (734 ºF)
Lower Explosive Limit
1.8 Vol %
Appearance
Ammonia-like
Crystallisation Point
---
Metal Corrosion
---
Ph
Not determined.
Density
0.94 g/cm3 (7.844 lbs/gal)
Bulk Density
---
Molecular Weight
---
Flammability
Not applicable.
Properties Status
---
Decomposition Temperature
Not determined.
Physical State Data
liquid
Kinematic Viscosity
Not determined.
Odor Threshold
Not determined.
Melting Point
-20 °C (-4 °F)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for N,N-Dimethylacetamide?

The signal word is danger.

What is the physical form of N,N-Dimethylacetamide?

N,N-Dimethylacetamide is a liquid appearing as ammonia-like . It has ammonia-like odor.

What is the solubility of N,N-Dimethylacetamide?

Fully miscible

What is N,N-Dimethylacetamide used for?

SU24 Scientific research and development

What are the hazard statements for N,N-Dimethylacetamide?

This substance has 3 hazard statements:

  • H227: Combustible liquid.
  • H312 + H332: Harmful in contact with skin or if inhaled.
  • H360: May damage fertility or the unborn child.

What is the melting point of N,N-Dimethylacetamide?

The melting point is -20 °C (-4 °F) and the boiling point is 165-166 °C (329-331 °F).