NextSDS Logo
Safety Data Sheet EN

Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard

CAS 26571-11-9

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard
Product Code
1467950
Chemical Name
Nonoxynol 9

Regulatory Identifiers

CAS Number
26571-11-9 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Manufacturers & Suppliers

S

Sigma-Aldrich

3050 Spruce Street SAINT LOUIS MO 63103 USA

+1 800-325-5832

Emergency Contacts

CHEMTREC

+1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Dam. Cat. 1 H318
Aquatic Acute Cat. 3 H402
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H302 Harmful if swallowed.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280 Wear eye protection/ face protection.
P501 Dispose of contents/ container to an approved waste disposal plant.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
N/A --- 90 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Skin contact

Wash off with soap and plenty of water. Consult a physician.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Hands

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Eyes

Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory

Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Environmental

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
---
Relative Evaporation Rate
---
Odor
---
Relative Density
1.05 g/cm3 at 25 ℃ (77 ºF)
Freezing Point
5 °℃ (41 ºF)
Flash Point
> 150 °C (> 302 °F)
Evaporation Rate
---
Voc Content
---
State Under Standard Conditions
---
Solubility In Water
---
Solubility
---
Physical State
liquid
Lower Explosive Limit
---
Vapor Density
---
Explosive Limits
---
Cloud Point
---
Bulk Density
---
Physical State Data
liquid
Molecular Weight
---
Vapor Pressure
---
Solidification Point
---
Solubility In Fat
---
Melting Point
5 °℃ (41 ºF)
Flammability
---
Dynamic Viscosity
---
Colour
light yellow
Decomposition Temperature
---
Partition Coefficient
---
Auto Ignition Temperature
---
Colour Intensity
---
Properties Status
---
Ph
6.0
Kinematic Viscosity
---
Form
liquid
Boiling Point
---
Appearance
Form: liquid Colour: light yellow
Metal Corrosion
---
Density
---
Crystallisation Point
---
Upper Explosive Limit
---
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard?

The signal word is danger.

What is the physical form of Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard?

Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard is a liquid appearing as form: liquid colour: light yellow with light yellow color.

What is Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H318: Causes serious eye damage.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Nonoxynol 9, United States Pharmacopeia (USP) Reference Standard?

The melting point is 5 °℃ (41 ºF) .

Compliance Scanner

Scan your compliance