Silver nitrate cryst. extra pure Ph Eur,BP,USP

fresh air. Call in physician.

Symptoms: Cough, Shortness of breath, Dizziness

Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician immediately.

Symptoms: Strong irritations after contact with eyes and skin.

rinse out with plenty of water. Immediately call in ophthalmologist.

Symptoms: Risk of permanent damage due to staining of the cornea. Risk of blindness!

make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately.

Symptoms: Diarrhoea, gastric spasms, Vomiting

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Pick up when dry. Conduct recycling. Clean up affected area.

Observe label precautions.

Tightly closed. Dry. Protected from light. Do not store near combustible materials.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Do not store near combustible materials.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: > 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when dusts are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

Sensitivity to light

has a corrosive effect

Risk of explosion with: Exothermic reaction with: Risk of ignition or formation of inflammable gases or vapours with: Alcohols, arsenic, halogen-halogen compounds, nonmetals, organic nitro compounds, Sodium hydroxide, magnesium, acetylidene, hydrazine and derivatives, carbides, azides, ammonium hydroxide, ethanol, Ammonia, Nitriles, Acetylene, Aldehydes, oxidisable substances, combustible substances

Strong heating (decomposition). Exposure to light.

Aluminium, Mild steel

in the event of fire: See section 5.

yes

yes