Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
3,5,5-Trimethyl-1-hexanol is a colourless substance commonly used laboratory chemicals, synthesis of substances.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H227: Combustible liquid.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H373: May cause damage to organs through prolonged or repeated exposure if swallowed.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- P260: Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
- P264: Wash skin thoroughly after handling.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
- P302+P352: IF ON SKIN: Wash with plenty of soap and water.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P314: Get medical advice/ attention if you feel unwell.
- P321: Specific treatment (see supplemental first aid instructions on this label).
- P332+P313: If skin irritation occurs: Get medical advice/ attention.
- P337+P313: If eye irritation persists: Get medical advice/ attention.
- P362: Take off contaminated clothing and wash before reuse.
- P370+P378: In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.
- P391: Collect spillage.
- P403+P235: Store in a well-ventilated place. Keep cool.
- P501: Dispose of contents/ container to an approved waste disposal plant.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Sigma-Aldrich Inc.
manufacturer
3050 Spruce Street, ST. LOUIS MO 63103, UNITED STATES
US
+1 314 771-5765
+1 800 325-5052
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
(314) 776-6555
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3,5,5-Trimethyl-1-hexanol EC: 222-376-7 | 3452-97-9 | 100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
🖐️ Skin Contact
Wash off with soap and plenty of water. Consult a physician.
👁️ Eye Contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
🍽️ Ingestion/Swallowing
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical as far as possible. Use very large quantities (flooding) of water applied ineffective. Cool all affected containers with flooding quantities of water.
⚠️ Specific Fire Hazards
Carbon oxides
🔥 Fire Fighting Instructions
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
🚨 Emergency Procedures
Evacuate personnel to safe areas. Ensure adequate ventilation. Remove all sources of ignition.
🌍 Environmental Precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Avoid contact with skin and eyes.
• Avoid inhalation of vapour or mist.
• Keep away from sources of ignition - No smoking.
• Take measures to prevent the build up of electrostatic charge.
🏪 Storage Conditions
• Keep container tightly closed in a dry and well-ventilated place.
• Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
🧤 Hand Protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Nitrile rubber Minimum layer thickness: 0.4 mm Break through time: 480 min Material tested: Camatril® (KCL 730 / Aldrich Z677442, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0.2 mm Break through time: 30 min Material tested: Dermatril® P (KCL 743 / Aldrich Z677388, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail [email protected], test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
👁️ Eye Protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
😷 Respiratory Protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
🦺 Skin/Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
🌍 Environmental Exposure Controls
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
Stable under recommended storage conditions.
🚫 Conditions to Avoid
Heat, flames and sparks.
🧪 Incompatible Materials
Strong oxidizing agents
💨 Hazardous Decomposition Products
Hazardous decomposition products formed under fire conditions. - Carbon oxides Other decomposition products - No data available
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Toxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential
🌱 Mobility in soil
🌱 Results of PBT and vPvB assessment
🌱 Other adverse effects
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.
🗂️ Product Disposal Recommendations
Dispose of as unused product.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
3082
📦 Proper Shipping Name
Environmentally hazardous substance, liquid, n.o.s. (3,5,5-Trimethyl-1-hexanol)
⚠️ Transport Hazard Class
9
📋 Packing Group
III
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Fire Hazard, Acute Health Hazard.
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
ℹ️ Additional Regulatory Information
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for 3,5,5-Trimethyl-1-hexanol?
The signal word for this substance is "warning".
What is the physical form of 3,5,5-Trimethyl-1-hexanol?
3,5,5-Trimethyl-1-hexanol is a liquid appearing as colourless with colourless color. It has no data available odor.
What is the solubility of 3,5,5-Trimethyl-1-hexanol?
0.45 g/l at 25 ℃ (77 ºF)
What is 3,5,5-Trimethyl-1-hexanol used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for 3,5,5-Trimethyl-1-hexanol?
This substance has 5 hazard statements: H227: Combustible liquid. H315: Causes skin irritation. H319: Causes serious eye irritation. H373: May cause damage to organs through prolonged or repeated exposure if swallowed. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of 3,5,5-Trimethyl-1-hexanol?
The melting point is < - 60 ℃ ( <- 76 °F) and the boiling point is 193 - 194 °℃ (379 - 381 ºF) - lit..