NextSDS Logo
3-

3-Hydroxypropionitrile

WARNING Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
3-Hydroxypropionitrile
Product Code
L12570
Chemical Name
3-hydroxypropiononitrile

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
SU24 Scientific research and development

Overview

3-Hydroxypropionitrile (CAS: 109-78-4 ) is a not determined substance commonly used su24 scientific research and development.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (Warning)

Hazard Classifications

Skin Irrit. Category 2 H315
Eye Irrit. Category 2A H319
STOT SE Category 3 H335

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Precautionary Statements

  • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P321: Specific treatment (see on this label).
  • P332+P313: If skin irritation occurs: Get medical advice/attention.
  • P362: Take off contaminated clothing and wash before reuse.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.
  • P405: Store locked up.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. company logo - Safety Data Sheet supplier organization

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

📍

30 Bond Street, Ward Hill, MA 01835-8099

🌍

US

📞

800-343-0660

📠

800-322-4757

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

(800) 343-0660

🕒

Monday-Friday, 8am-7pm EST

Carechem 24

📞

(866) 928-0789

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

General Composition

Substances

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
3-hydroxypropiononitrile
EC: 203-704-8
109-78-4 100% ✓ Non-hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Symptoms:

May cause respiratory irritation.

🖐️ Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms:

Causes skin irritation.

👁️ Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms:

Causes serious eye irritation.

🍽️ Ingestion/Swallowing

Seek medical treatment.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🔥 Flash Point
128 ℃ (262 °F)
Critical Property
📊 Kinematic Viscosity
Not determined.
💨 Vapor Pressure
Not determined
📊 Dynamic Viscosity
Not determined.
📊 Voc Content
Not available
👃 Odor
Not determined
👁️ Appearance
Not determined
🧪 Ph
Not determined.
📊 State Under Standard Conditions
Not available
🧪 Physical State
Liquid
Critical Property
📊 Relative Evaporation Rate
Not available
💨 Evaporation Rate
Not determined.
📊 Molecular Weight
Not available
📊 Physical State Data
liquid
🔥 Flammability
Not determined.
📊 Freezing Point
Not available
💨 Boiling Point
227-228 ℃ (441-442 °F)
Critical Property
📊 Properties Status
Not available
🎨 Colour
Not available
📊 Vapor Density
Not determined.
📊 Partition Coefficient
Not determined.
📊 Crystallisation Point
Not available
📊 Solubility In Water
Fully miscible
📊 Relative Density
Not determined.
📊 Solubility In Fat
Not available
📊 Metal Corrosion
Not available
📊 Form
Not available
📊 Bulk Density
Not available
📊 Softening Point
Not available
📊 Lower Explosive Limit
Not determined
📊 Odor Threshold
Not determined.
📊 Upper Explosive Limit
Not determined
📊 Auto Ignition Temperature
Not determined.
📊 Cloud Point
Not available
📊 Explosive Limits
Not available
⚖️ Density
1.041 g/cm3 (8.687 lbs/gal)
Critical Property
📊 Decomposition Temperature
Not determined
📊 Solidification Point
Not available
💧 Solubility
Fully miscible
🧊 Melting Point
-46 °℃ (-51 °F)
Critical Property
📊 Colour Intensity
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

🧤 Hand Protection

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness 0.11 mm

👁️ Eye Protection

Safety glasses

😷 Respiratory Protection

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

🦺 Skin/Body Protection

Protective work clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

📦 Proper Shipping Name

Not applicable

⚠️ Transport Hazard Class

Not applicable

📋 Packing Group

Not applicable

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for 3-Hydroxypropionitrile?

The signal word for this substance is "warning".

What is the physical form of 3-Hydroxypropionitrile?

3-Hydroxypropionitrile is a liquid appearing as not determined . It has not determined odor.

What is the solubility of 3-Hydroxypropionitrile?

Fully miscible

What is 3-Hydroxypropionitrile used for?

SU24 Scientific research and development

What are the hazard statements for 3-Hydroxypropionitrile?

This substance has 3 hazard statements: H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation.

What is the melting point of 3-Hydroxypropionitrile?

The melting point is -46 °℃ (-51 °F) and the boiling point is 227-228 ℃ (441-442 °F).