NextSDS Logo
Safety Data Sheet EN

Benzoic acid

CAS 65-85-0
EC 200-618-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Benzoic acid
Product Code
36230

Regulatory Identifiers

CAS Number
65-85-0 Check regulations →
EC Number
200-618-2 Check regulations →

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H302 Harmful if swallowed.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P280 Wear protective clothing.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Benzoic acid EC: 200-618-2 65-85-0 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm

Eyes

Tightly sealed goggles. Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
Not determined.
Relative Density
Not determined.
Density
1.32 g/cm3 (11.015 lbs/gal)
Bulk Density
---
Decomposition Temperature
Not determined
Explosive Limits
---
Melting Point
121-124 ℃ (250-255 °F)
Form
Crystalline powder
Solubility
---
Flammability
Not determined.
Physical State
---
Auto Ignition Temperature
570 °C (1058 °F)
Solidification Point
---
Ph
2.5-3.5
Relative Evaporation Rate
---
Colour
---
Colour Intensity
---
Voc Content
---
Dynamic Viscosity
Not applicable.
Partition Coefficient
Not determined.
Boiling Point
249 ℃ (480 °F)
Odor
Weak, characteristic
Evaporation Rate
Not applicable.
Properties Status
---
Physical State Data
solid
Lower Explosive Limit
Not determined
Crystallisation Point
---
Kinematic Viscosity
Not applicable.
Appearance
---
Cloud Point
---
Metal Corrosion
---
Flash Point
121 °C (250 °F)
Vapor Pressure
Not applicable.
Solubility In Water
3 g/l
State Under Standard Conditions
---
Solubility In Fat
---
Freezing Point
---
Vapor Density
Not applicable.
Upper Explosive Limit
Not determined
Molecular Weight
---
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Benzoic acid?

The signal word is danger.

What are the hazard statements for Benzoic acid?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of Benzoic acid?

The melting point is 121-124 ℃ (250-255 °F) and the boiling point is 249 ℃ (480 °F).