Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Potassium perchlorate
- Product Code
- 11630
Regulatory Identifiers
- CAS Number
- 7778-74-7 Check regulations →
- EC Number
- 231-912-9 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium perchlorate EC: 231-912-9 | 7778-74-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Halocarbon extinguisher
This substance is an oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition.
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Dispose of contaminated material as waste according to section 13.
Related Products
Similar products with comparable safety profiles
Potassium chlorate
CAS: 3811-04-9
Ammonium perchlorate
CAS: 7790-98-9
Potassium chromate
CAS: 7789-00-6
Sodium perchlorate, anhydrous
CAS: 7601-89-0
Potassium dichromate
CAS: 7778-50-9
Potassium dichromate
CAS: 7778-50-9
Potassium permanganate
CAS: 7722-64-7
Potassium bromate
CAS: 7758-01-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Ensure good ventilation at the workplace. Prevent formation of dust.
Store in cool, dry place in tightly closed containers. Store under dry inert gas. This product is hygroscopic. Keep container tightly sealed. Protect from humidity and water.
Substance/product can reduce the ignition temperature of flammable substances. This substance is an oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR Penetration time of glove material (in minutes) 480 Glove thickness 0.11 mm
Safety glasses
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
May intensify fire; oxidizer. May cause fire or explosion; strong oxidizer.
Reacts with strong oxidizing agents, Reacts with reducing agents, Reacts with flammable substances
No further relevant information available.
Flammable substances, Reducing agents, Water/moisture, Oxidizing agents, Organic materials, Metal powders
Hydrogen chloride (HCl), Potassium oxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1489
- Shipping Name
- Potassium perchlorate
- Transport Class
- 5.1
- Packing Group
- II
Warning: Oxidizing substances
Warning: Oxidizing substances
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Potassium perchlorate?
The signal word is danger.
What is the physical form of Potassium perchlorate?
Potassium perchlorate is a powder with white color. It has odorless odor.
What is Potassium perchlorate used for?
SU24 Scientific research and development
What are the hazard statements for Potassium perchlorate?
This substance has 2 hazard statements:
- H271: May cause fire or explosion; strong oxidizer.
- H302: Harmful if swallowed.
What is the melting point of Potassium perchlorate?
The melting point is 301-304 °C (574-579 °F) and the boiling point is Not determined.