Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fluorescent brightener 71
- Product Code
- QA-9315
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Combi-Blocks, Inc.
7949 Silverton Ave # 915, San Diego, CA 92126, USA
858-635-8950
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fluorescent brightener 71 | 16090-02-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder or carbon dioxide extinguishers
Firefighter Protection
Protective clothing and self-contained breathing apparatus should be worn.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow material to enter drains or water courses.
Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal.
Materials: sand or similar inert absorbent material
Related Products
Similar products with comparable safety profiles
Fluorescent Brightener 220
CAS: 16470-24-9
Motip Fluorescent Spray
---
Fluorescence Mounting Medium
---
BP Fluor 488 NHS ester
---
COPPER GLO 23 Brightener
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
Fluorene for synthesis
CAS: 86-73-7
Acid Red 73
CAS: 5413-75-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet.
Store in closed vessels.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in a chemical fume hood.
chemical-resistant gloves
safety goggles
laboratory clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Heat, flames and sparks.
Oxidizing agents.
Carbon monoxide, nitrogen oxides, sulfur oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Arrange disposal as special waste, by licensed disposal company
in consultation with local waste disposal authority
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fluorescent brightener 71?
The signal word is no signal word.
What is the melting point of Fluorescent brightener 71?
The melting point is No data and the boiling point is No data.