NextSDS Logo
Safety Data Sheet EN

Dichlorosilane

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dichlorosilane
Product Code
333395

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

S

Sigma-Aldrich

manufacturer

3050 Spruce Street, SAINT LOUIS MO 63103, USA

+18003255832

Emergency Contacts

Emergency Contact

(314) 776-6555

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Flam. Gas
Acute Tox.
Skin Corr.

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Dichlorosilane EC: 223-888-3 4109-96-0 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing give artificial respiration. Consult a physician.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.

Eye contact

Continue rinsing eyes during transport to hospital. Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Ingestion

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Immediate Medical Attention

Consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO2) Dry powder

Firefighter Protection

Wear self contained breathing apparatus for fire fighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Do not flush with water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.

Storage

Keep container tightly closed in a dry and well-ventilated place. Store in cool place. Never allow product to get in contact with water during storage. Contents under pressure.

Fire prevention

Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Handle with gloves.

Eyes

Tightly fitting safety goggles. Faceshield (8-inch minimum).

Respiratory

Respiratory protection is not required. Where protection is desired, use multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body

Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
---
Solubility In Water
no data available
Auto Ignition Temperature
58 °C (136 °F)
State Under Standard Conditions
---
Melting Point
-122 °C (-188 °F)
Metal Corrosion
---
Relative Density
1.200 g/cm3
Evaporation Rate
---
Boiling Point
8.3 °C (46.9 °F)
Crystallisation Point
---
Explosive Limits
---
Dynamic Viscosity
---
Freezing Point
---
Upper Explosive Limit
99 % (V)
Ph
no data available
Flash Point
-37 °C (-35 °F)
Form
gaseous
Appearance
gaseous, colourless
Properties Status
---
Physical State Data
gas
Colour
colourless
Molecular Weight
---
Partition Coefficient
---
Odor Threshold
---
Voc Content
---
Physical State
gaseous
Flammability
---
Softening Point
---
Bulk Density
---
Relative Evaporation Rate
---
Solubility In Fat
---
Colour Intensity
---
Vapor Pressure
1,672 hPa (1,254 mmHg) at 20 °C (68 °F)
Lower Explosive Limit
4.1 % (V)
Vapor Density
---
Density
1.200 g/cm³
Cloud Point
---
Decomposition Temperature
---
Kinematic Viscosity
---
Solubility
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Reacts violently with water.

Hazardous reactions

Reacts violently with water.

Avoid

Heat, flames and sparks. Exposure to moisture.

Incompatible

Strong oxidizing agents Strong bases, Reacts violently with water., Alcohols, Strong oxidizing agents

Decomposition

Hazardous decomposition products formed under fire conditions. - Hydrogen chloride gas, silicon oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Observe all federal, state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2189
Shipping Name
Dichlorosilane
Transport Class
2.3
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

OSHA Hazards: Flammable Gas, Highly toxic by inhalation, Corrosive

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Dichlorosilane?

The signal word is no signal word.

What is the physical form of Dichlorosilane?

Dichlorosilane is a gaseous appearing as gaseous, colourless with colourless color.

What is the melting point of Dichlorosilane?

The melting point is -122 °C (-188 °F) and the boiling point is 8.3 °C (46.9 °F).