NextSDS Logo
Safety Data Sheet EN

Diethylamine

CAS 109-89-7
EC 203-716-3

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Diethylamine
Product Code
A11716
Chemical Name
diethylamine

Regulatory Identifiers

CAS Number
109-89-7 Check regulations →
EC Number
203-716-3 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

866-928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Skin Corr. Cat. 1A H314
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H312
Acute Tox. Cat. 4 H332

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

Hazard Statements

H225 Highly flammable liquid and vapor.
H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P260 Do not breathe dusts or mists.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
diethylamine EC: 203-716-3 109-89-7 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Harmful if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Harmful in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Harmful in contact with skin.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Fluorocarbon rubber (Viton).

Eyes

Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type AXBEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Freezing Point
---
Ph
Not determined.
State Under Standard Conditions
---
Odor
Ammonia-like
Auto Ignition Temperature
310 °C (590 °F)
Metal Corrosion
---
Solidification Point
---
Solubility In Water
Fully miscible
Voc Content
---
Decomposition Temperature
Not determined.
Odor Threshold
Not determined.
Relative Density
Not determined.
Boiling Point
54-55 °C (129-131 °F)
Appearance
Not determined.
Physical State
Liquid
Density
0.706 g/cm3 (5.892 lbs/gal)
Partition Coefficient
Not determined.
Solubility In Fat
---
Solubility
815 g/l Fully miscible
Vapor Pressure
260 hPa (195 mm Hg)
Vapor Density
Not determined.
Evaporation Rate
Not determined.
Colour
---
Cloud Point
---
Softening Point
---
Upper Explosive Limit
10.1 Vol %
Relative Evaporation Rate
---
Form
Liquid
Flammability
Not determined.
Dynamic Viscosity
Not determined.
Molecular Weight
---
Melting Point
-50 °C (-58 °F)
Flash Point
-28 °C (-18 °F)
Physical State Data
liquid
Explosive Limits
---
Crystallisation Point
---
Bulk Density
---
Lower Explosive Limit
1.7 Vol %
Kinematic Viscosity
Not determined.
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1154
Shipping Name
Diethylamine 1154 Diethylamine DIETHYLAMINE
Transport Class
3 Flammable liquids
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Diethylamine?

The signal word is danger.

What is the physical form of Diethylamine?

Diethylamine is a liquid appearing as not determined. . It has ammonia-like odor.

What is the solubility of Diethylamine?

815 g/l Fully miscible

What is Diethylamine used for?

SU24 Scientific research and development

What are the hazard statements for Diethylamine?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Diethylamine?

The melting point is -50 °C (-58 °F) and the boiling point is 54-55 °C (129-131 °F).

Compliance Scanner

Scan your compliance