NextSDS Logo
Safety Data Sheet EN

N-Phenyl-1-naphthylamine

CAS 90-30-2
EC 201-983-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N-Phenyl-1-naphthylamine
Product Code
A14752
Chemical Name
N-Phenyl-1-naphthylamine

Regulatory Identifiers

CAS Number
90-30-2 Check regulations →
EC Number
201-983-0 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS07 - Health hazard

GHS07

Hazard Statements

H301 Toxic if swallowed.
H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor/...
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
N-Phenyl-1-naphthylamine EC: 201-983-0 90-30-2 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Immediate Medical Attention

Seek immediate medical advice (for inhalation and skin contact), consult a doctor (for eye contact), or seek medical treatment (for swallowing).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide Nitrogen oxides (NOx)

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation

Environmental

Do not allow material to be released to the environment without proper governmental permits.

Cleanup methods

Dispose of contaminated material as waste according to section 13.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace.

Storage

Keep container tightly sealed. Store in cool, dry conditions in well sealed containers.

Fire prevention

No information known.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Boiling Point
226 °C (439 °F) (15 mmHg)
Upper Explosive Limit
Not determined
Dynamic Viscosity
Not applicable.
Form
Solid
Physical State Data
solid
Vapor Density
Not applicable.
Lower Explosive Limit
Not determined
Partition Coefficient
Not determined.
Solubility In Water
Not determined
Odor
Not determined
Colour Intensity
---
Relative Density
Not determined.
Metal Corrosion
---
Cloud Point
---
Kinematic Viscosity
Not applicable.
Flash Point
Not applicable
Voc Content
---
Bulk Density
---
Freezing Point
---
Melting Point
60-62 °C (140-144 °F)
Colour
Brown
Ph
Not applicable.
Softening Point
---
Appearance
Solid
Odor Threshold
Not determined.
Flammability
Not determined.
State Under Standard Conditions
---
Solidification Point
---
Relative Evaporation Rate
---
Density
Not determined
Vapor Pressure
Not applicable.
Decomposition Temperature
Not determined
Physical State
Solid
Explosive Limits
---
Solubility In Fat
---
Evaporation Rate
Not applicable.
Molecular Weight
---
Solubility
---
Properties Status
---
Auto Ignition Temperature
Not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

No dangerous reactions known

Avoid

No further relevant information available.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide, Nitrogen oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (N-Phenyl-1-naphthylamine)
Transport Class
9
Packing Group
III
IMDG

Warning: Miscellaneous dangerous substances and articles

IATA

Warning: Miscellaneous dangerous substances and articles

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for N-Phenyl-1-naphthylamine?

The signal word is danger.

What is the physical form of N-Phenyl-1-naphthylamine?

N-Phenyl-1-naphthylamine is a solid appearing as solid with brown color. It has not determined odor.

What is N-Phenyl-1-naphthylamine used for?

SU24 Scientific research and development

What are the hazard statements for N-Phenyl-1-naphthylamine?

This substance has 2 hazard statements:

  • H301: Toxic if swallowed.
  • H317: May cause an allergic skin reaction.

What is the melting point of N-Phenyl-1-naphthylamine?

The melting point is 60-62 °C (140-144 °F) and the boiling point is 226 °C (439 °F) (15 mmHg).