Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tetrafluoroboric acid, 41% aqueous solution
- Product Code
- A16062
Regulatory Identifiers
- CAS Number
- 16872-11-0 Check regulations →
- EC Number
- 240-898-3 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, A Johnson Matthey Company
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
www.alfa.com
Emergency Contacts
Health, Safety and Environmental Department
(800) 343-0660
During normal hours
Carechem 24
(866) 928-0789
After normal hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
41% aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetrafluoroboric acid EC: 240-898-3 | 16872-11-0 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Hydrofluoric acid solution 39-40%
UFI: GQY2-RN19-GN70-78TR
Hydrofluoric acid, 40%
---
Hexafluorosilicic acid, 35% w/w aq. soln
---
Hydrofluoric acid 38-40%
UFI: GPQP-N1DS-A00Y-JFNQ
Tetrafluoromethane, 99%
---
Hexafluoroacetone, anhydrous, 97%
---
1,1,1,2-Tetrafluoroethane, 99%
---
Formic acid, ACS, 88%
CAS: 64-18-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.
Tightly sealed goggles. Full face protection.
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1775
- Shipping Name
- Fluoroboric acid
- Transport Class
- 8
- Packing Group
- II
F-A,S-B
F-A,S-B
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tetrafluoroboric acid, 41% aqueous solution?
The signal word is danger.
What is the physical form of Tetrafluoroboric acid, 41% aqueous solution?
Tetrafluoroboric acid, 41% aqueous solution is a liquid with colorless color. It has pungent odor.
What is Tetrafluoroboric acid, 41% aqueous solution used for?
SU24 Scientific research and development
What are the hazard statements for Tetrafluoroboric acid, 41% aqueous solution?
This substance has 2 hazard statements:
- H227: Combustible liquid.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Tetrafluoroboric acid, 41% aqueous solution?
The melting point is Not determined and the boiling point is 130 °℃ (266 °F) (dec).