NextSDS Logo
Safety Data Sheet EN

2-Ethylhexyl methacrylate

CAS 688-84-6
EC 211-708-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Ethylhexyl methacrylate
Product Code
42303
Chemical Name
2-ethylhexyl methacrylate

Regulatory Identifiers

CAS Number
688-84-6 Check regulations →
EC Number
211-708-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar GmbH & Co.KG logo

Alfa Aesar GmbH & Co.KG

manufacturer

Zeppelinstr. 7b, 76185 Karlsruhe / Germany

http://www.giftinfo.uni-mainz.de

Emergency Contacts

Carechem 24

+44 (0) 1235 239 670

Poison Information Center Mainz

+49(0)6131/19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
4-Methoxyphenol EC: 211-708-6 150-76-5 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Instantly wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult doctor.

Ingestion

Seek medical treatment.

Immediate Medical Attention

Consult doctor if symptoms persist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: Not determined.

Eyes

Safety glasses.

Respiratory

Use breathing protection with high concentrations.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
Colourless
Colour Intensity
---
Form
Liquid
Odor
Ether-like
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
-50 ℃
Boiling Point
218 ℃
Flash Point
92 ℃
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0,885 g/cm3
Flammability
Not determined.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
Not miscible or difficult to mix
Partition Coefficient
Not determined.
Solubility In Water
Not miscible or difficult to mix
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Ethylhexyl methacrylate?

The signal word is warning.

What is the physical form of 2-Ethylhexyl methacrylate?

2-Ethylhexyl methacrylate is a liquid appearing as liquid with colourless color. It has ether-like odor.

What is the solubility of 2-Ethylhexyl methacrylate?

Not miscible or difficult to mix

What is 2-Ethylhexyl methacrylate used for?

SU24 Scientific research and development

What are the hazard statements for 2-Ethylhexyl methacrylate?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of 2-Ethylhexyl methacrylate?

The melting point is -50 ℃ and the boiling point is 218 ℃.

Compliance Scanner

Scan your compliance