NextSDS Logo
Py

Pyrrolidine

DANGER Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Pyrrolidine
Product Code
A14852
Chemical Name
Pyrrolidine

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
SU24 Scientific research and development

Overview

Pyrrolidine (CAS: 123-75-1 ) commonly used su24 scientific research and development.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 2 H225
Acute Tox. Category 3 H301
Skin Corr. Category 1A H314
Eye Dam. Category 1 H318
Acute Tox. Category 4 H332

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H225: Highly flammable liquid and vapor.
  • H301: Toxic if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H332: Harmful if inhaled.

Precautionary Statements

  • P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
  • P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
  • P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P405: Store locked up.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. company logo - Safety Data Sheet supplier organization

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

📍

30 Bond Street, Ward Hill, MA 01835-8099

🌍

US

📞

800-343-0660

📠

800-322-4757

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

(800) 343-0660

🕒

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

📞

(866) 928-0789

🕒

After normal business hours

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

General Composition

Chemical characterization: Substances

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Pyrrolidine
EC: 204-648-7
123-75-1 100% ✓ Non-hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms:

Harmful if inhaled.

🖐️ Skin Contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms:

Causes severe skin burns.

👁️ Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms:

Causes serious eye damage.

🍽️ Ingestion/Swallowing

Seek medical treatment.

Symptoms:

Toxic if swallowed.

🚨 Immediate Medical Attention Required

No further relevant information available.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

📊 Decomposition Temperature
Not determined
💨 Vapor Pressure
75 hPa (56 mm Hg)
📊 Partition Coefficient
Not determined.
🧪 Ph
Not determined.
📊 Softening Point
Not available
📊 Colour Intensity
Not available
📊 Solubility In Fat
Not available
🧪 Physical State
Liquid
Critical Property
📊 Dynamic Viscosity
Not determined.
📊 Vapor Density
Not determined.
📊 Physical State Data
liquid
📊 Explosive Limits
Not available
👁️ Appearance
Not available
🧊 Melting Point
-63 °℃ (-81 ºF)
Critical Property
🔥 Flammability
Not determined.
📊 Relative Density
Not determined.
📊 Relative Evaporation Rate
Not available
📊 Kinematic Viscosity
Not determined.
📊 Upper Explosive Limit
10.6 Vol %
💨 Boiling Point
86-88 ℃ (187-190 °F)
Critical Property
📊 Metal Corrosion
Not available
⚖️ Density
0.856 g/cm3 (7.143 lbs/gal)
Critical Property
📊 Solubility In Water
Fully miscible
👃 Odor
Like rotten eggs
📊 Cloud Point
Not available
🔥 Flash Point
2 °℃ (36 °F)
Critical Property
📊 Properties Status
Not available
📊 Crystallisation Point
Not available
📊 Lower Explosive Limit
1.6 Vol %
📊 Voc Content
Not available
📊 Freezing Point
Not available
📊 State Under Standard Conditions
Not available
💧 Solubility
Not available
📊 Bulk Density
Not available
💨 Evaporation Rate
Not determined.
📊 Molecular Weight
Not available
📊 Odor Threshold
Not determined.
📊 Auto Ignition Temperature
320 °C (608 °F)
📊 Form
Liquid
🎨 Colour
Not available
📊 Solidification Point
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

🧤 Hand Protection

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Fluorocarbon rubber (Viton). Penetration time of glove material (in minutes) 480. Glove thickness: 0.7 mm.

👁️ Eye Protection

Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU).

😷 Respiratory Protection

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

🦺 Skin/Body Protection

Protective work clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN1922

📦 Proper Shipping Name

Pyrrolidine

⚠️ Transport Hazard Class

3

📋 Packing Group

II

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Pyrrolidine?

The signal word for this substance is "danger".

What is the physical form of Pyrrolidine?

Pyrrolidine is a liquid . It has like rotten eggs odor.

What is Pyrrolidine used for?

SU24 Scientific research and development

What are the hazard statements for Pyrrolidine?

This substance has 4 hazard statements: H225: Highly flammable liquid and vapor. H301: Toxic if swallowed. H314: Causes severe skin burns and eye damage. H332: Harmful if inhaled.

What is the melting point of Pyrrolidine?

The melting point is -63 °℃ (-81 ºF) and the boiling point is 86-88 ℃ (187-190 °F).