Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bis(pentafluorophenylcopper) dioxane complex
- Product Code
- 18534
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Emergency Contacts
Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
After normal business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bis(pentafluorophenylcopper) dioxane complex | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, extinguishing powder or foam. Water may be ineffective but may be used for cooling exposed containers.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Hydrogen fluoride (HF), Metal oxide fume
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Keep away from ignition sources.
Do not allow product to reach sewage system or any water course.
Ensure adequate ventilation.
Related Products
Similar products with comparable safety profiles
Bis(8-quinolinolato)copper(II)
---
Copper(II) phthalocyanine
CAS: 147-14-8
Pentafluorobenzene
CAS: 363-72-4
Copper(I) oxide
---
Copper(II) chloride
CAS: 7447-39-4
2,3,7,8-Tetrachlorodibenzo-p-dioxin solution
CAS: 1746-01-6
2,2-Pentamethylene-1,3-dioxolane
CAS: 177-10-6
2-Methyl-5-pyridylzinc bromide, 0.5M in THF
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Ensure good ventilation at the workplace.
Refrigerate. Store away from air. Protect from heat. Store away from water/moisture. Store away from oxidizing agents. Store under dry inert gas. Keep container tightly sealed. Protect from humidity and water.
Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined.
Safety glasses.
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Reacts with strong oxidizing agents
No further relevant information available.
Air, Water/moisture, Oxidizing agents, Heat
Carbon monoxide and carbon dioxide, Hydrogen fluoride, Metal oxide fume
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1325
- Shipping Name
- Flammable solids, organic, n.o.s. (Bis(pentafluorophenylcopper) dioxane complex)
- Transport Class
- 4.1
- Packing Group
- III
Warning: Flammable solids, self-reactive substances and solid desensitised explosives
Warning: Flammable solids, self-reactive substances and solid desensitised explosives
Warning: Flammable solids, self-reactive substances and solid desensitised explosives
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bis(pentafluorophenylcopper) dioxane complex?
The signal word is warning.
What is the physical form of Bis(pentafluorophenylcopper) dioxane complex?
Bis(pentafluorophenylcopper) dioxane complex is a powder appearing as powder . It has not determined odor.
What is Bis(pentafluorophenylcopper) dioxane complex used for?
SU24 Scientific research and development
What are the hazard statements for Bis(pentafluorophenylcopper) dioxane complex?
This substance has 4 hazard statements:
- H228: Flammable solid.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Bis(pentafluorophenylcopper) dioxane complex?
The melting point is Not determined and the boiling point is Not determined.