Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Palmitic acid
- Product Code
- B20322
Regulatory Identifiers
- CAS Number
- 57-10-3 Check regulations →
- EC Number
- 200-312-9 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Palmitic acid EC: 200-312-9 | 57-10-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Immediate Medical Attention
Seek immediate medical advice for inhalation and skin contact. Consult a doctor for eye contact. Seek medical treatment for swallowing.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly sealed. Store in cool, dry place in tightly closed containers.
Store in cool, dry place in tightly closed containers.
No information known.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material (in minutes): 480. Glove thickness: 0.11 mm.
Safety glasses.
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Reacts with strong oxidizing agents
No further relevant information available.
Oxidizing agents
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For use only by technically qualified individuals.
Although this chemical may sometimes be used as a food or drug or cosmetic, our products are not approved or suitable for such use or for human consumption.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Palmitic acid?
The signal word is no signal word.
What is the physical form of Palmitic acid?
Palmitic acid is a prills appearing as prills with white color. It has odorless odor.
What is Palmitic acid used for?
SU24 Scientific research and development
What is the melting point of Palmitic acid?
The melting point is 62-65 °C (144-149 °F) and the boiling point is 215 °C (419 °F) (15mm Hg).