Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Triethylenetetramine
- Product Code
- H37450
- Chemical Name
- Triethylenetetramine
Regulatory Identifiers
- CAS Number
- 112-24-3 Check regulations →
- EC Number
- 203-950-6 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar
manufacturer
Thermo Fisher Scientific Chemicals, Inc. 30 Bond Street Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
CAS# Description: 112-24-3 Triethylenetetramine Identification number(s): EC number: 203-950-6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Triethylenetetramine EC: 203-950-6 | 112-24-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Causes severe skin burns. Harmful in contact with skin. May cause an allergic skin reaction.
Rinse opened eye for several minutes under running water.
Immediate Medical Attention
Seek immediate medical advice (for inhalation and skin contact). Consult a doctor (for eye contact). Seek medical treatment (for swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Nitrogen oxides (NOx)
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
No information known.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Chloroprene rubber, CR. Penetration time of glove material (in minutes) 480. Glove thickness 0.6 mm.
Tightly sealed goggles. Full face protection.
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Reacts with strong oxidizing agents
Decomposition will not occur if used and stored according to specifications.
Acids, Water/moisture, Oxidizing agents
Carbon monoxide and carbon dioxide, Nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available.
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
PBT: Not applicable. vPvB: Not applicable.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2259
- Shipping Name
- Triethylenetetramine
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS).
For use only by technically qualified individuals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Triethylenetetramine?
The signal word is danger.
What is the physical form of Triethylenetetramine?
Triethylenetetramine is a liquid appearing as liquid . It has amine-like odor.
What is the solubility of Triethylenetetramine?
Fully miscible
What is Triethylenetetramine used for?
SU24 Scientific research and development
What are the hazard statements for Triethylenetetramine?
This substance has 3 hazard statements:
- H312: Harmful in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
What is the melting point of Triethylenetetramine?
The melting point is 12 °C (54 °F) and the boiling point is 267 °C (513 °F).