TRIETHYLENETETRAMINE (TETA)

If breathed in, move person into fresh air. Consult a physician after significant exposure.

Take off contaminated clothing and shoes immediately. Rinse immediately with plenty of water. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. If skin irritation persists, call a physician.

Rinse with plenty of water. Get medical attention immediately. Continue to rinse during transport. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Take victim immediately to hospital. Do not induce vomiting!

Symptoms: May cause chemical burns in mouth and throat.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Do not allow run-off from fire fighting to enter drains or water courses.

Use personal protective equipment. Wear respiratory protection. Ensure adequate ventilation.

Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder).

Materials: sand, silica gel, acid binder, universal binder

For personal protection see section 8. Avoid formation of aerosol. Do not breathe vapours or spray mist. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Avoid contact with skin, eyes and clothing.

Keep container tightly closed in a dry and well-ventilated place.

Smoking, eating and drinking should be prohibited in the application area.

Normal measures for preventive fire protection.

Effective exhaust ventilation system. Ensure that eyewash stations and safety showers are close to the workstation location.

butyl-rubber

Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems.

In the case of vapour formation use a respirator with an approved filter. Wear full face mask supplied with: Gas cartridge K (ammonia, green).

Protective suit

Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.

Stable under recommended storage conditions.

Stable under normal conditions.

Heating can release hazardous gases.

Extremes of temperature and direct sunlight.

Reacts with copper, aluminium, zinc and their alloys. Strong acids and oxidizing agents Halogenated compounds

nitrogen oxides (NOx)

Dispose of contents/container in accordance with local regulation.

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.