Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lutiram
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
crop protection product, fungicide
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-27777
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
crop protection product, fungicide, water dispersible granules
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| metiram | 9006-42-2 | 70% | Yes |
| Sodium diisobutylnaphthalenesulphonate EC: 248-326-4 | 27213-90-7 | 5% | Yes |
| Lignosulfonic acid, sodium salt | 8061-51-6 | 30% | No |
| Glucose EC: 200-075-1 | 50-99-7 | 3% | No |
| Sodium sulphate EC: 231-820-9 | 7757-82-6 | 3% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Immediate Medical Attention
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with high efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P3 or FFP3).
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (contains METIRAM)
- Transport Class
- 9, EHSM
- Packing Group
- III
None known
None known
None known
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lutiram?
The signal word is warning.
What is the physical form of Lutiram?
Lutiram is a solid with light brown color. It has mild, spicy odor.
What is the solubility of Lutiram?
dispersible
What is Lutiram used for?
crop protection product, fungicide
What are the hazard statements for Lutiram?
This substance has 4 hazard statements:
- H317: May cause an allergic skin reaction.
- H373: May cause damage to organs (Skeletal muscle) through prolonged or repeated exposure.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Lutiram?
The melting point is approx. 156 ℃ .