NextSDS Logo
So

Soluplus ®

solid SDS/MSDS
Add SDS to Library

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Soluplus ®

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
pharmaceutical excipient

Overview

Soluplus ® is a powder substance commonly used pharmaceutical excipient.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

N/A

GHS Hazard Pictograms & Safety Symbols

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

Precautionary Statements

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

BASF SE

manufacturer

📍

67056 Ludwigshafen, GERMANY

🌍

DE

📞

+49 621 60-48434

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

+49 180 2273-112

🌍

DE

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

General Composition

Acetic acid ethenyl ester, polymer with 1-ethenylhexahydro-2H-azepin-2-one and oxirane, graft; Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Acetic acid ethenyl ester, polymer with 1-ethenylhexahydro-2H-azepin-2-one and oxirane, graft 936030-92-1 Not specified ✓ Non-hazardous

Composition Notes

No particular hazards known.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Keep patient calm, remove to fresh air.

🖐️ Skin Contact

Wash thoroughly with soap and water.

👁️ Eye Contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

🍽️ Ingestion/Swallowing

Rinse mouth and then drink 200-300 ml of water.

🚨 Immediate Medical Attention Required

Treatment: Symptomatic treatment (decontamination, vital functions).

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

✅ Suitable Extinguishing Media

water spray, dry powder, foam, carbon dioxide

❌ Unsuitable Extinguishing Media

water jet

⚠️ Specific Fire Hazards

nitrogen oxides, carbon oxides. The substances/groups of substances mentioned can be released in case of fire.

🛡️ Firefighter Protection Equipment

Wear a self-contained breathing apparatus.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

💧 Small Spill Procedures

Contain with dust binding material and dispose of.

🌊 Large Spill Procedures

Sweep/shovel up.

🌍 Environmental Precautions

Do not discharge into drains/surface waters/groundwater.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

N
Natuphos ® E 10000
No identifier available
F
Focus Plus
No identifier available
S
Sulprofos
No identifier available
A
AquaSolve
No identifier available
S
Solopol Classic
No identifier available
U
ULTRASOUND GEL ( AquaUltra Clear ) ( AquaUltra Basic ) ( AqaUltra Aloe ) ( Hyperscan100 )
No identifier available
U
Ultramid ® B36 LN
CAS: 25038-54-4
S
SUPA-FLEX
No identifier available

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State
solid
Critical Property
📊 Physical State Data
solid
📊 State Under Standard Conditions
Not available
👁️ Appearance
powder
🎨 Colour
white to light yellow
📊 Colour Intensity
Not available
📊 Form
powder
👃 Odor
faint, fruity
📊 Odor Threshold
not determined
🧪 Ph
3 - 5,5
🧊 Melting Point
approx. 137 ℃
Critical Property
💨 Boiling Point
Not available
🔥 Flash Point
not applicable
Critical Property
📊 Freezing Point
Not available
📊 Softening Point
Not available
📊 Solidification Point
Not available
📊 Cloud Point
Not available
📊 Crystallisation Point
Not available
📊 Relative Evaporation Rate
Not available
💨 Evaporation Rate
Not available
💨 Vapor Pressure
not determined
📊 Vapor Density
Not available
📊 Relative Density
Not available
📊 Bulk Density
approx. 500 - 600 kg/m3
⚖️ Density
Not available
🔥 Flammability
not applicable; not highly flammable
📊 Upper Explosive Limit
Not available
📊 Lower Explosive Limit
Not available
📊 Explosive Limits
Not available
📊 Auto Ignition Temperature
Not available
📊 Decomposition Temperature
>= 385 °℃ (DSC (DIN 51007))
💧 Solubility
completely soluble; > 90 %(m)
📊 Partition Coefficient
not determined
📊 Solubility In Water
completely soluble; > 90 %(m)
📊 Solubility In Fat
Not available
📊 Molecular Weight
Not available
📊 Voc Content
Not available
📊 Metal Corrosion
No corrosive effect on metal.
📊 Dynamic Viscosity
Not available
📊 Kinematic Viscosity
Not available
📊 Properties Status
Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

⚠️ Handling Precautions

• Avoid dust formation.

• Provide exhaust ventilation if dust is formed.

• Take precautionary measures against static discharges.

• Avoid all sources of ignition: heat, sparks, open flame.

🏪 Storage Conditions

• Keep container tightly closed in a cool, well-ventilated place.

• Protect against heat.

🔥 Fire Prevention Measures

Avoid dust formation. Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🧤 Hand Protection

Wear chemical resistant protective gloves. Manufacturer's directions for use should be observed because of great diversity of types.

👁️ Eye Protection

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

😷 Respiratory Protection

Breathing protection if dusts are formed. Particle filter with low efficiency for solid particles (e.g. EN 143 or 149, Type P1or FFP1)

🦺 Skin/Body Protection

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

✅ Chemical Stability

The product is stable if stored and handled as prescribed/indicated.

⚗️ Reactivity

No hazardous reactions if stored and handled as prescribed/indicated.

⚠️ Hazardous Reactions

Accumulation of fine dust may entail the risk of a dust explosion in the presence of air.

🚫 Conditions to Avoid

See SDS section 7 - Handling and storage. Avoid dust formation. Avoid electro-static discharge.

🧪 Incompatible Materials

Substances to avoid: atmospheric moisture

💨 Hazardous Decomposition Products

No hazardous decomposition products if stored and handled as prescribed/indicated.

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

🌱 Toxicity

Assessment of aquatic toxicity: The inhibition of the degradation activity of activated sludge is not anticipated when introduced to biological treatment plants in appropriate low concentrations. There is a high probability that the product is not acutely harmful to aquatic organisms. Toxicity to fish: LC50 (96 h) > 120 mg/l, Brachydanio rerio (OECD Guideline 203, static) The details of the toxic effect relate to the nominal concentration. Aquatic invertebrates: EC50 (48 h) > 120 mg/l, Daphnia magna (OECD Guideline 202, part 1, static) The details of the toxic effect relate to the nominal concentration. Microorganisms/Effect on activated sludge: EC20 (180 min) > 1.000 mg/l, activated sludge, domestic (OECD Guideline 209, aquatic) The details of the toxic effect relate to the nominal concentration.

🌱 Persistence and degradability

Assessment biodegradation and elimination (H2O): Not readily biodegradable (by OECD criteria). Poorly biodegradable. Elimination information: < 10 % CO2 formation relative to the theoretical value (28 d) (OECD 301B; ISO 9439; 92/69/EWG, C.4-C) (aerobic, activated sludge, domestic)

🌱 Bioaccumulative potential

Bioaccumulation potential: not determined

🌱 Mobility in soil

Assessment transport between environmental compartments: Adsorption in soil: No data available.

🌱 Results of PBT and vPvB assessment

According to Annex XIII of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH): The product does not fulfill the criteria for PBT (Persistent/bioaccumulative/toxic) and vPvB (very persistent/very bioaccumulative). Self classification

🌱 Other adverse effects

The substance is not listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

♻️ Waste Treatment Methods

Observe national and local legal requirements.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the physical form of Soluplus ®?

Soluplus ® is a solid appearing as powder with white to light yellow color. It has faint, fruity odor.

What is the solubility of Soluplus ®?

completely soluble; > 90 %(m)

What is Soluplus ® used for?

pharmaceutical excipient

What is the melting point of Soluplus ®?

The melting point is approx. 137 ℃ .