Ascusol PU 92

Remove to fresh air. If symptoms persist, call a physician. If unconscious, place in recovery position and seek medical advice.

Symptoms: CNS-depression and narcosis.

Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.

Symptoms: Dries out the skin.

Rinse thoroughly with plenty of water, also under the eyelids. Consult a physician.

If swallowed, DO NOT induce vomiting. Risk of aspiration! Call a physician immediately. If a person vomits when lying on his back, place him in the recovery position.

Symptoms: Risk of aspiration! Risk of serious damage to the lungs (by aspiration). Aspiration may cause pulmonary oedema and pneumonitis.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

High volume water jet

Combustible liquid. Vapours may form explosive mixtures with air.

Cool closed containers exposed to fire with water spray.

Use personal protective equipment. Keep away unprotected persons. Provide adequate ventilation. Keep away from heat and sources of ignition. Avoid contact with skin and eyes. Do not breathe gas/fumes/vapour/spray.

Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders). Keep in suitable, closed containers for disposal.

Materials: liquid-binding material (sand, diatomite, acid binders, universal binders)

Keep container tightly closed. Provide sufficient air exchange and/or exhaust in work rooms. Do not breathe gas/fumes/vapour/spray. Avoid contact with the skin and the eyes.

Keep tightly closed in a dry and cool place. Keep in a well-ventilated place. Keep away from heat.

Take off all contaminated clothing immediately. Do not breathe gas/fumes/vapour/spray. Avoid contact with the skin and the eyes. Keep away from food, drink and animal feedingstuffs. Smoking, eating and drinking should be prohibited in the application area. Wash hands before breaks and at the end of workday.

Combustible liquid. Possible formation of ignitable mixtures in air if heated above flash point and/or if sprayed (atomised). Take measures to prevent the build up of electrostatic charge. Remove all sources of ignition.

Solvent-resistant gloves The data about break through time/strength of material are standard values! The exact break through time/strength of material has to be obtained from the producer of the protective glove. Protective gloves should be replaced at first signs of wear. As the product is a mixture of several substances, the durability of the glove materials cannot be calculated in advance and has to be tested before use.

Tightly fitting safety goggles

In case of insufficient ventilation, wear suitable respiratory equipment. When aerosol or mist is formed use suitable respiratory protection. Recommended Filter type: Combination filter: A-P2

Solvent resistant protective clothing Flame retardant protective clothing

Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration. If the product contaminates rivers and lakes or drains inform respective authorities. Local authorities should be advised if significant spillages cannot be contained.

Not applicable.

Not applicable.