Optimo EC Safety Data Sheet | danger | liquid

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name

Optimo EC

Regulatory Identifiers

CAS Number

N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses

crop protection product, fungicide

Overview

Optimo EC commonly used crop protection product, fungicide.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Asp. Tox. Category 1 H304

Flam. Liq. Category 4 H227

Acute Tox. Category 4 H302

Acute Tox. Category 4 H332

Skin Irr. Category 2 H315

Repr. Category 2 H361

Aquatic Acute Category 1 H400

Aquatic Chronic Category 1 H410

GHS Hazard Pictograms & Safety Symbols

GHS07

GHS08

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

H227: Combustible liquid.
H315: Causes skin irritation.
H304: May be fatal if swallowed and enters airways.
H361: Suspected of damaging fertility. Suspected of damaging the unborn child.
H302: Harmful if swallowed or if inhaled.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read carefully and follow all instructions.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves, protective clothing and eye protection or face protection.
P261: Avoid breathing mist.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P264: Wash contaminated body parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P312: Call a POISON CENTER or physician if you feel unwell.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or physician.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P330: Rinse mouth.
P391: Collect spillage.
P332+P313: If skin irritation occurs: Get medical attention.
P308+P313: IF exposed or concerned: Get medical attention.
P331: Do NOT induce vomiting.
P362+P364: Take off contaminated clothing and wash it before reuse.
P370+P378: In case of fire: Use water spray, dry powder, foam or carbon dioxide for extinction.
P405: Store locked up.
P403: Store in a well-ventilated place.
P501: Dispose of contents and container to hazardous or special waste collection point.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

BASF SE

manufacturer

📍

67056 Ludwigshafen, GERMANY

🌍

📞

+49 621 60-27777

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

+49 180 2273-112

🌍

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

crop protection product, fungicide, Emulsifiable concentrate (EC)

Chemical Components & Hazardous Substances

Chemical Name	CAS Number	Concentration	Hazardous
dimethomorph EC: 404-200-2	110488-70-5	6.88%	⚠️ Hazardous
pyraclostrobin	175013-18-0	3.81%	⚠️ Hazardous
Solvent naphtha (petroleum), heavy arom. EC: 265-198-5	64742-94-5	Not specified	⚠️ Hazardous
benzyl alcohol EC: 202-859-9	100-51-6	Not specified	⚠️ Hazardous
Poly(oxy-1,2-ethanediyl), .alpha .- [tris(1-phenylethyl)phenyl] -. omega .- hydroxy-	N/A	Not specified	⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Keep patient calm, remove to fresh air, seek medical attention.

🖐️ Skin Contact

Immediately wash thoroughly with soap and water, seek medical attention.

👁️ Eye Contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.

🍽️ Ingestion/Swallowing

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention. Do not induce vomiting due to aspiration hazard.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

✅ Suitable Extinguishing Media

water spray, carbon dioxide, foam, dry powder

❌ Unsuitable Extinguishing Media

water jet

⚠️ Specific Fire Hazards

Carbon monoxide, hydrogen chloride, Carbon dioxide, nitrogen oxides, halogenated compounds, sulfur oxides. The substances/groups of substances mentioned can be released in case of fire.

🔥 Fire Fighting Instructions

In case of fire and/or explosion do not breathe fumes. Keep containers cool by spraying with water if exposed to fire.

🛡️ Firefighter Protection Equipment

Wear self-contained breathing apparatus and chemical-protective clothing.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

🚨 Emergency Procedures

Use personal protective clothing. Avoid contact with the skin, eyes and clothing. Do not breathe vapour/spray.

💧 Small Spill Procedures

Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).

🌊 Large Spill Procedures

Dike spillage. Pump off product.

🌍 Environmental Precautions

Do not discharge into the subsoil/soil. Do not discharge into drains/surface waters/groundwater.

🧹 Cleanup Methods

Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations.

Cleanup Materials:

suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr)

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

EcoProof 20

No identifier available

ecovio ® PS1606

No identifier available

Irganox ® 1010 - DW ECO

No identifier available

Integrity 668 EC

No identifier available

Focus Plus

No identifier available

DEOMAX DM12 ULTRA SAE 10W40

No identifier available

TEC7

No identifier available

TEC7

No identifier available

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State

liquid

Critical Property

📊 Physical State Data

liquid

📊 State Under Standard Conditions

liquid

👁️ Appearance

Not available

🎨 Colour

yellow to brown

📊 Colour Intensity

Not available

📊 Form

liquid

👃 Odor

aromatic

📊 Odor Threshold

Not determined since harmful by inhalation.

🧪 Ph

approx. 6 - 8 (CIPAC standard water D, 1 %(m), 20 °℃) (as an emulsion)

🧊 Melting Point

approx. < - 5 ℃

Critical Property

💨 Boiling Point

approx. 244 - 292 ℃

Critical Property

🔥 Flash Point

93 ℃

Critical Property

📊 Freezing Point

Not available

📊 Softening Point

Not available

📊 Solidification Point

Not available

📊 Cloud Point

Not available

📊 Crystallisation Point

Not available

📊 Relative Evaporation Rate

Not available

💨 Evaporation Rate

Not available

💨 Vapor Pressure

approx. 0,003 kPa

📊 Vapor Density

Not available

📊 Relative Density

approx. 1,05 g/cm3

📊 Bulk Density

Not available

⚖️ Density

approx. 1,05 g/cm3

Critical Property

🔥 Flammability

Combustible liquid.

📊 Upper Explosive Limit

As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.

📊 Lower Explosive Limit

As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.

📊 Explosive Limits

Not available

📊 Auto Ignition Temperature

approx. 435 ℃

📊 Decomposition Temperature

155 ℃, 25 KJ/kg (DSC (OECD 113)) 315 °℃, 320 KJ/kg (DSC (OECD 113)) Not a substance liable to self-decomposition according to UN transport regulations, class 4.1.

💧 Solubility

emulsifiable

📊 Partition Coefficient

2,63 - 2,73

📊 Solubility In Water

emulsifiable

📊 Solubility In Fat

Not available

📊 Molecular Weight

Not available

📊 Voc Content

Not available

📊 Metal Corrosion

Not available

📊 Dynamic Viscosity

Not available

📊 Kinematic Viscosity

Not available

📊 Properties Status

Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

⚠️ Handling Precautions

• No special measures necessary if stored and handled correctly.

• Ensure thorough ventilation of stores and work areas.

• When using do not eat, drink or smoke.

• Hands and/or face should be washed before breaks and at the end of the shift.

🏪 Storage Conditions

• Keep away from heat.

• Protect from direct sunlight.

🧼 General Hygiene Measures

Hands and/or face should be washed before breaks and at the end of the shift.

🔥 Fire Prevention Measures

Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🧤 Hand Protection

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

👁️ Eye Protection

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

😷 Respiratory Protection

Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e. g. EN 14387 Type ABEK-P3)

🦺 Skin/Body Protection

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

✅ Chemical Stability

The product is stable if stored and handled as prescribed/indicated.

⚗️ Reactivity

No hazardous reactions if stored and handled as prescribed/indicated.

⚠️ Hazardous Reactions

No hazardous reactions if stored and handled as prescribed/indicated.

🚫 Conditions to Avoid

See SDS section 7 - Handling and storage.

🧪 Incompatible Materials

Substances to avoid: strong bases, strong acids, strong oxidizing agents

💨 Hazardous Decomposition Products

No hazardous decomposition products if stored and handled as prescribed/indicated.

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

🌱 Mobility in soil

Assessment transport between environmental compartments: Adsorption in soil: The product has not been tested. The statement has been derived from the properties of the individual components. Information on: dimethomorph (ISO); 4-(3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl) acryloyl)morpholine. Assessment transport between environmental compartments: Volatility: The substance will not evaporate into the atmosphere from the water surface. Adsorption in soil: Following exposure to soil, adsorption to solid soil particles is probable, therefore contamination of groundwater is not expected. Information on: pyraclostrobin (ISO); methyl N-{2-[1-(4-chlorophenyl)-1H-pyrazol-3-yloxymethyl]phenyl}(N-methoxy)carbamate. Assessment transport between environmental compartments: Adsorption in soil: Following exposure to soil, adsorption to solid soil particles is probable, therefore contamination of groundwater is not expected.

Adsorption to solid soil particles is probable, therefore contamination of groundwater is not expected.

🌱 Results of PBT and vPvB assessment

The product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria or the vPvB (very persistent/very bioaccumulative) criteria.

The product does not contain a substance fulfilling the PBT or vPvB criteria.

🌱 Endocrine disrupting properties

🌱 Other adverse effects

The product does not contain substances that are listed in the Montreal Protocol on substances that deplete the ozone layer.

The product does not contain substances that deplete the ozone layer.

🌱 Toxicity

Assessment of aquatic toxicity: Very toxic to aquatic life with long lasting effects. Toxicity to fish: LC50 (96 h) 0,23 mg/l, Oncorhynchus mykiss. Aquatic invertebrates: EC50 (48 h) 0,19 mg/l, Daphnia magna. Aquatic plants: EC50 (72 h) 20,03 mg/l (growth rate), Pseudokirchneriella subcapitata. EC10 (72 h) 1,19 mg/l (growth rate), Pseudokirchneriella subcapitata. Information on: dimethomorph (ISO); 4-(3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl) acryloyl)morpholine. Chronic toxicity to fish: EC10 (60 d) 0,116 mg/l, Oncorhynchus mykiss. No observed effect concentration (34 d) 0,107 mg/l, Pimephales promelas. Information on: pyraclostrobin (ISO); methyl N-{2-[1-(4-chlorophenyl)-1H-pyrazol-3-yloxymethyl]phenyl}(N-methoxy)carbamate. Chronic toxicity to fish: No observed effect concentration (98 d) approx. 0,00235 mg/l, Oncorhynchus mykiss (OECD Guideline 210, Flow through.)

Very toxic to aquatic life with long lasting effects.

🌱 Persistence and degradability

Assessment biodegradation and elimination (H2O): The product has not been tested. The statement has been derived from the properties of the individual components. Information on: dimethomorph (ISO); 4-(3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl)morpholine. Assessment biodegradation and elimination (H2O): Not readily biodegradable (by OECD criteria). Information on: pyraclostrobin (ISO); methyl N-{2-[1-(4-chlorophenyl)-1H-pyrazol-3-yloxymethyl]phenyl}(N-methoxy)carbamate. Assessment biodegradation and elimination (H2O): Not readily biodegradable (by OECD criteria).

Not readily biodegradable (by OECD criteria).

🌱 Bioaccumulative potential

Assessment bioaccumulation potential: The product has not been tested. The statement has been derived from the properties of the individual components. Information on: dimethomorph (ISO); 4-(3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl)morpholine. Assessment bioaccumulation potential: Because of the n-octanol/water distribution coefficient (log Pow) accumulation in organisms is not to be expected. Information on: pyraclostrobin (ISO); methyl N-{2-[1-(4-chlorophenyl)-1H-pyrazol-3-yloxymethyl]phenyl}(N-methoxy)carbamate. Bioaccumulation potential: Bioconcentration factor: 379 - 507, Oncorhynchus mykiss (OECD Guideline 305). Accumulation in organisms is not to be expected.

Accumulation in organisms is not to be expected.

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

♻️ Waste Treatment Methods

Must be sent to a suitable incineration plant, observing local regulations.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN3082

📦 Proper Shipping Name

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PYRACLOSTROBIN, SOLVENT NAPHTHA)

⚠️ Transport Hazard Class

9, EHSM

📋 Packing Group

III

🚛 ADR Transport Precautions

None known

🚢 IMDG Maritime Transport Precautions

EmS: F-A; S-F

✈️ IATA Air Transport Precautions

None known

Regulatory Information & Compliance

Chemical regulations, safety assessments, and regulatory compliance status

📋 Regulatory Summary

To avoid risks to man and the environment, comply with the instructions for use.

❌ Chemical Safety Assessment

No chemical safety assessment has been performed for this substance.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Optimo EC?

The signal word for this substance is "danger".

What is the physical form of Optimo EC?

Optimo EC is a liquid with yellow to brown color. It has aromatic odor.

What is the solubility of Optimo EC?

emulsifiable

What is Optimo EC used for?

crop protection product, fungicide

What are the hazard statements for Optimo EC?

This substance has 7 hazard statements: H227: Combustible liquid. H315: Causes skin irritation. H304: May be fatal if swallowed and enters airways. H361: Suspected of damaging fertility. Suspected of damaging the unborn child. H302: Harmful if swallowed or if inhaled. H400: Very toxic to aquatic life. H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Optimo EC?

The melting point is approx. < - 5 ℃ and the boiling point is approx. 244 - 292 ℃.