NextSDS Logo
Safety Data Sheet EN

ECO-SOL MAX, ESL3-MG/ESL3-4MG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ECO-SOL MAX, ESL3-MG/ESL3-4MG

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Inkjet Printing

Manufacturers & Suppliers

Roland DG Benelux NV logo

Roland DG Benelux NV

distributor

Bell-Telephonelaan 2G, B-2440 Geel, Belgium

+32 14 57 59 11

http://www.rolanddg.be

Emergency Contacts

Giftnotruf Bonn

+49 228 19240

24h

Roland DG Benelux NV

+32 14 57 59 11

Only available during office hours.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Repr. Cat. 1B H360

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H360 May damage fertility or the unborn child.

Precautionary Statements

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P362 Take off contaminated clothing.
IF ON SKIN: Wash with plenty of soap and water.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
bis(2-ethoxyethyl) ether EC: 203-963-7 112-36-7 55 - 65% Yes
7-butyrolactone EC: 202-509-5 96-48-0 20% Yes
bis(2-(2-methoxyethoxy)ethyl) ether EC: 205-594-7 143-24-8 10 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. In case of irregular breathing or respiratory arrest provide artificial respiration. Consult physician immediately.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Take off contaminated clothing and wash it before reuse. In case of skin irritation, consult a physician.

Eye contact

In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist.

Ingestion

Do NOT induce vomiting. Consult physician immediately.

Immediate Medical Attention

Consult physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, Carbon dioxide (CO2), Foam, Dry extinguishing powder

Firefighter Protection

Wear full chemical protective clothing. Use appropriate respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

See protective measures under point 7 and 8.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Handle and open container with care. All work processes must always be designed so that the following is as low as possible: Inhalation, Skin contact, Eye contact.

Storage

Protect against: Frost, Heat

Hygiene

When using do not eat, drink, smoke, sniff.

Fire prevention

Keep away from sources of ignition. - No smoking. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation as well as local exhaustion at critical locations.

Hands

Hand protection: not required.

Eyes

Eye protection: not required.

Respiratory

Respiratory protection necessary at: insufficient ventilation, insufficient exhaust.

Skin/Body

Body protection: not required.

Environmental

Discharge into the environment must be avoided.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
not determined
Voc Content
---
Solubility In Fat
---
Vapor Pressure
not determined
Upper Explosive Limit
16 Vol-% (as gamma-But-yrolactone)
Vapor Density
not determined
Evaporation Rate
not determined
Solubility In Water
easily soluble
Explosive Limits
---
Kinematic Viscosity
not determined
Bulk Density
not determined
Colour
red
Decomposition Temperature
not determined
Relative Evaporation Rate
---
Ph
not determined
Physical State
liquid
Form
---
Cloud Point
---
Odor Threshold
not determined
Density
not determined
Metal Corrosion
---
Softening Point
---
Solidification Point
---
Solubility
---
Flash Point
71 °C
Odor
characteristic
Lower Explosive Limit
0.3 Vol-% (as gamma-But-yrolactone)
Relative Density
---
Flammability
---
Auto Ignition Temperature
not determined
Molecular Weight
---
Partition Coefficient
not determined
Freezing Point
not determined
Physical State Data
liquid
Appearance
---
State Under Standard Conditions
---
Colour Intensity
---
Melting Point
not determined
Properties Status
---
Crystallisation Point
---
Boiling Point
not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Chemically stable under recommended conditions of storage, use and temperature.

Reactivity

Chemically stable under recommended conditions of storage, use and temperature.

Hazardous reactions

No hazardous reaction when handled and stored according to provisions.

Avoid

Frost, Heat

Incompatible

Oxidising agent

Decomposition

No known hazardous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ECO-SOL MAX, ESL3-MG/ESL3-4MG?

The signal word is danger.

What is the physical form of ECO-SOL MAX, ESL3-MG/ESL3-4MG?

ECO-SOL MAX, ESL3-MG/ESL3-4MG is a liquid with red color. It has characteristic odor.

What is ECO-SOL MAX, ESL3-MG/ESL3-4MG used for?

Inkjet Printing

What are the hazard statements for ECO-SOL MAX, ESL3-MG/ESL3-4MG?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H360: May damage fertility or the unborn child.

What is the melting point of ECO-SOL MAX, ESL3-MG/ESL3-4MG?

The melting point is not determined and the boiling point is not determined.