NextSDS Logo
Safety Data Sheet EN

Honor Fungicide

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Honor Fungicide

Regulatory Identifiers

CAS Number
N/A

Identified Uses

crop protection product, fungicide

Manufacturers & Suppliers

B

BASF SE

manufacturer

67056 Ludwigshafen, GERMANY

+49 621 60-27777

Emergency Contacts

International emergency number

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
STOT SE Cat. 3 H335
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H302 Harmful if swallowed.
H335 May cause respiratory irritation.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read carefully and follow all instructions.
P261 Avoid breathing dust or fume.
P264 Wash contaminated body parts thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 Call a POISON CENTER or physician if you feel unwell.
P330 Rinse mouth.
P391 Collect spillage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and container to hazardous or special waste collection point.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

crop protection product, fungicide, water dispersible granules

Chemical Name CAS Number Concentration Hazardous
pyraclostrobin 175013-18-0 17% Yes
boscalid 188425-85-6 11.17% Yes
Ammonium sulphate EC: 231-984-1 7783-20-2 --- Yes
Naphthalenesulfonic acid, polymer with formaldehyde, sodium salt --- --- No
Residues (petroleum), catalytic reformer fractionator, sulfonated, polymers with formaldehyde, sodium salts 68425-94-5 --- No
Silica gel, precipitated, crystalline free 112926-00-8 --- No
Lignosulfonic acid, sodium salt 8061-51-6 --- No
Kaolin EC: 310-194-1 1332-58-7 --- No
Sodium sulphate EC: 231-820-9 7757-82-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air, seek medical attention.

Skin contact

Wash thoroughly with soap and water.

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Ingestion

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory

Suitable respiratory protection for higher concentrations or long-term effect: Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)

Skin/Body

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State Data
solid
Solubility In Water
dispersible
Physical State
solid
Odor
almost odourless
Kinematic Viscosity
---
Flash Point
not applicable, the product is a solid
Upper Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Density
---
Relative Evaporation Rate
---
Softening Point
---
Solubility
dispersible
Boiling Point
The product has not been tested.
Relative Density
---
Freezing Point
---
Properties Status
---
Metal Corrosion
---
Crystallisation Point
---
Molecular Weight
---
Appearance
---
Colour
light brown
Flammability
not highly flammable (Directive 84/449/EEC, A.10)
Form
granules
Dynamic Viscosity
---
Vapor Density
---
Vapor Pressure
not applicable
Odor Threshold
Not determined due to potential health hazard by inhalation.
Evaporation Rate
not applicable
Decomposition Temperature
230,6 ℃, 84 KJ/kg Not a substance liable to self-decomposition regulations, class 4.1.
Auto Ignition Temperature
approx. 328 ℃
Lower Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Explosive Limits
---
Voc Content
---
Ph
approx. 5 - 7
Colour Intensity
---
Partition Coefficient
not applicable
State Under Standard Conditions
---
Melting Point
The product has not been tested.
Cloud Point
---
Bulk Density
approx. 558 kg/m3 (24,6 ℃)
Solidification Point
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (PYRACLOSTROBIN)
Transport Class
9, EHSM
Packing Group
III
ADR

None known

IMDG

EmS: F-A; S-F

IATA

None known

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Honor Fungicide?

The signal word is warning.

What is the physical form of Honor Fungicide?

Honor Fungicide is a solid with light brown color. It has almost odourless odor.

What is the solubility of Honor Fungicide?

dispersible

What is Honor Fungicide used for?

crop protection product, fungicide

What are the hazard statements for Honor Fungicide?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H335: May cause respiratory irritation.
  • H400: Very toxic to aquatic life.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Honor Fungicide?

The melting point is The product has not been tested. and the boiling point is The product has not been tested..

Compliance Scanner

Scan your compliance