Previcur® Fungicide

Move to fresh air. Keep patient warm and at rest. If symptoms persist, call a physician.

Wash off with soap and water. If symptoms persist, call a physician.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Get medical attention if irritation develops and persists.

Do NOT induce vomiting. Rinse mouth. Call a physician or poison control center immediately.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

High volume water jet

Dangerous gases are evolved in the event of a fire.

Avoid contact with spilled product or contaminated surfaces. Keep people away from and upwind of spill/leak. When dealing with a spillage do not eat, drink or smoke.

Do not allow to get into surface water, drains and ground water.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Collect and transfer the product into a properly labelled and tightly closed container. Clean contaminated floors and objects thoroughly, observing environmental regulations.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Avoid contact with skin, eyes and clothing. Keep working clothes separately. Remove soiled clothing immediately and clean thoroughly before using again. Wash hands before breaks and immediately after handling the product.

Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from direct sunlight. Protect from frost.

Avoid contact with skin, eyes and clothing. Keep working clothes separately. Remove soiled clothing immediately and clean thoroughly before using again. Wash hands before breaks and immediately after handling the product.

Keep away from heat and sources of ignition.

Use only in area provided with appropriate exhaust ventilation.

Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Wash gloves when contaminated. Dispose of when contaminated inside, when perforated or when contamination on the outside cannot be removed. Wash hands frequently and always before eating, drinking, smoking or using the toilet. Material Nitrile rubber. Rate of permeability > 480 min. Glove thickness > 0.4 mm. Protective index Class 6. Directive Protective gloves complying with EN 374.

Wear goggles (conforming to EN166, Field of Use = 5 or equivalent).

Respiratory protection is not required under anticipated circumstances of exposure. Respiratory protection should only be used to control residual risk of short duration activities, when all reasonably practicable steps have been taken to reduce exposure at source e.g. containment and/or local extract ventilation. Always follow respirator manufacturer's instructions regarding wearing and maintenance.

Wear standard coveralls and Category 3 Type 4 suit. If there is a risk of significant exposure, consider a higher protective type suit. Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.

Stable under recommended storage conditions.

Stable under normal conditions.

No hazardous reactions when stored and handled according to prescribed instructions.

Extremes of temperature and direct sunlight.

Store only in the original container.

No decomposition products expected under normal conditions of use. Thermal decomposition can lead to release of: Carbon oxides, Nitrogen oxides (NOx)