NextSDS Logo
Safety Data Sheet EN

Storm Wax Block Bait

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Storm Wax Block Bait

Regulatory Identifiers

CAS Number
N/A

Identified Uses

rodenticide, biocide

Manufacturers & Suppliers

B

BASF SE

manufacturer

67056 Ludwigshafen, GERMANY

+49 621 60-27777

Emergency Contacts

International emergency number

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

STOT RE Cat. 2 H373

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H373 May cause damage to organs (Blood) through prolonged or repeated exposure.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P260 Do not breathe dust.
P314 Get medical advice/attention if you feel unwell.
P501 Dispose of contents and container to hazardous or special waste collection point.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Biocidal product, rodenticide, Bait

Chemical Name CAS Number Concentration Hazardous
flocoumafen (ISO); reaction mass of: cis-4-hydroxy-3-(1,2,3,4-tetrahydro-3-(4-(4-trifluoromethylbenzyloxy)phenyl)-1-naphthyl)coumarin; trans-4-hydroxy-3-(1,2,3,4-tetrahydro-3-(4-(4-trifluoromethylbenzyloxy)phenyl)-1-naphthyl)coumarin EC: 421-960-0 90035-08-8 0.005% Yes
Wheat flour EC: 310-127-6 130498-22-5 75% No
Paraffin waxes and Hydrocarbon waxes EC: 232-315-6 8002-74-2 30% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air, seek medical attention.

Skin contact

Wash thoroughly with soap and water.

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Ingestion

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Symptomatic treatment (decontamination, vital functions).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves (EN 374) are required for the safe handling of this product and are also recommended for protection against rodent-borne diseases. e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other Manufacturer's directions for use should be observed because of great diversity of types.

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory

Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with high efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P3 or FFP3).

Skin/Body

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid, blocks
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
blue
Colour Intensity
---
Form
solid, blocks
Odor
almost odourless, faint odour, fresh cut grass
Odor Threshold
---
Ph
approx. 4 - 7
Melting Point
>= 64 ℃
Boiling Point
> 300 ℃
Flash Point
not applicable, the product is a solid
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not applicable
Vapor Pressure
not applicable
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
approx. 1,27 g/cm3 (20 ℃)
Flammability
not flammable
Upper Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Lower Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Explosive Limits
---
Auto Ignition Temperature
267 ℃
Decomposition Temperature
No decomposition if stored and handled as prescribed/indicated.
Solubility
insoluble
Partition Coefficient
not applicable
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
not applicable, the product is a solid
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Storm Wax Block Bait?

The signal word is warning.

What is the physical form of Storm Wax Block Bait?

Storm Wax Block Bait is a solid, blocks with blue color. It has almost odourless, faint odour, fresh cut grass odor.

What is the solubility of Storm Wax Block Bait?

insoluble

What is Storm Wax Block Bait used for?

rodenticide, biocide

What are the hazard statements for Storm Wax Block Bait?

This substance has 1 hazard statement:

  • H373: May cause damage to organs (Blood) through prolonged or repeated exposure.

What is the melting point of Storm Wax Block Bait?

The melting point is >= 64 ℃ and the boiling point is > 300 ℃.