Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- M-Slack Wax 150
- Product Code
- 5-0052500
- Chemical Name
- Slack wax, petroleum [A complex combination of hydrocarbons obtained from a petroleum fraction by solvent crystallization (solvent dewaxing) or as a distillation fraction from a very waxy crude. It consists predominantly of saturated straight and branched chain hydrocarbons having carbon numbers predominantly greater than C20.]
Regulatory Identifiers
- CAS Number
- 64742-61-6 Check regulations →
- EC Number
- 265-165-5 Check regulations →
- REACH No.
- 01-2119489284-28
Identified Uses
Process oil – lubricating agent, anti-adhesive, anti-cacking agent, binder, plasticizer.
Uses advised against
No additional information available.
Manufacturers & Suppliers
MOGoiI GmbH
manufacturer
Rotherstraße 22, 10245 Berlin
+49 30 240 88 29 20
http://www.mogoil.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Slack wax, petroleum; CAS No.:64742-61-6 EC No.: 265-165-5 EC Index No.: 649-244-00-5; 100%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Slack wax, petroleum EC: 265-165-5 | 64742-61-6 | 100% | No |
Regulation (EC) No 1272/2008 does not provide a specific concentration value, M-factor and estimated acute toxicity value for the above substance.
Notes
Note N: The harmonized classification as a carcinogen applies unless the full refining history is known and it can be shown that the substance from which it is produced is not a carcinogen, in which case a classification in accordance with Title II of this Regulation shall be performed also for that hazard class. As the full refining history is known and the pre-cursor is not classified as a carcinogen, the substance is not classified, accordingly.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Remove contaminated clothing and shoes. Gently wash with plenty of water. Seek medical attention if ill effect or irritation develops.
Rinse immediately and thoroughly, pulling the eyelids well away from the eye. Remove contact lenses, if present and easy to do. Continue rinsing.
Do not induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Symptoms may be delayed. Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
powder, foam, water fog.
Do not use water jet.
Toxic fumes may be released.
Evacuate area. Use water spray or fog for cooling exposed containers. Prevent fire-fighting water from entering the environment.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus (SCBA) must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Do not breathe vapors. Avoid contact with skin, eyes and clothing. Ensure procedures and training for emergency decontamination and disposal are in place.
Avoid release to the environment.
Mecanically recover the product.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe vapors. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Avoid release to the environment. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.
Store tightly closed in a dry, cool and well-ventilated place. Store at ambient temperature.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Take off immediately all contaminated clothing and wash it before reuse.
Take precautionary measures against static discharge. Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Emergency shower installed. Provide local exhaust or general room ventilation to minimize vapor concentrations.
The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. Protective gloves. EN 374, breakthrough time: >480min, thickness of the glove material >0.34mm. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
Chemical goggles or safety glasses with side-shields. DIN EN 166.
In case of inadequate ventilation wear respiratory protection. Wear suitable respiratory equipment EN 14387.
Wear suitable protective clothing: EN 14605. Wear sealed work clothes, chemical resistant. Chemical resistant safety shoes.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Non-reactive under normal conditions of use, storage and transport.
Reacts with strong oxidizing agents.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid extremely low temperatures.
Strong oxidizing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.2. Persistence and degradability
Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance does not contain PBT or vPvB substances at concentrations of 0.1% or greater.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for M-Slack Wax 150?
The signal word is no signal word.
What is the physical form of M-Slack Wax 150?
M-Slack Wax 150 is a solid appearing as waxy solid at 20°c .
What is M-Slack Wax 150 used for?
Process oil – lubricating agent, anti-adhesive, anti-cacking agent, binder, plasticizer.
What is the melting point of M-Slack Wax 150?
The melting point is Typical 51°C and the boiling point is 300 – 800°C.