Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Basorol® PE 10100
- Chemical Name
- Oxirane, methyl-, polymer with oxirane
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Performance Chemicals for Oilfield Applications
Manufacturers & Suppliers
BASF Central Asia LLP
manufacturer
Medeyskii district, Kynaeva street 77, 050010-Almaty
+7 727 323 23 33
Emergency Contacts
Emergency Contact
112
Emergency Contact
103
Emergency Contact
8 800 080 52 12 - 143
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oxirane, methyl-, polymer with oxirane | 9003-11-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN ISO 374-1). Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other. Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Basorol® PE 10100?
The signal word is warning.
What is the physical form of Basorol® PE 10100?
Basorol® PE 10100 is a liquid appearing as colourless with colourless color. It has product specific odor.
What is the solubility of Basorol® PE 10100?
partly soluble < 100 g/l
What is Basorol® PE 10100 used for?
Performance Chemicals for Oilfield Applications
What are the hazard statements for Basorol® PE 10100?
This substance has 1 hazard statement:
- H316: Causes mild skin irritation.
What is the melting point of Basorol® PE 10100?
The melting point is approx. - 25 ℃ and the boiling point is > 250 ℃ The substance / product decomposes..