CAT EXTREME APPLICATION GREASE 2

Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency.

Symptoms: Local necrosis as evidenced by delayed onset of pain and tissue damage a few hours after injection.

Flush thoroughly with water. If irritation occurs, get medical assistance.

Symptoms: Irritation.

Seek medical attention.

No special requirements under ordinary conditions of use and with adequate ventilation.

Chemical resistant gloves are recommended. Nitrile, minimum 0.38 mm thickness or comparable protective barrier material with a high performance level for continuous contact use conditions, permeation breakthrough minimum 480 minutes in accordance with CEN standards EN 420 and EN 374. CEN standards EN 420 and EN 374 provide general requirements and lists of glove types. Inspect and replace worn or damaged gloves.

If contact is likely, safety glasses with side shields are recommended.

No protection is ordinarily required under normal conditions of use and with adequate ventilation. For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable.

Chemical/oil resistant clothing is recommended.

Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.