NextSDS Logo
Sp

Special Release Agent

Aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Special Release Agent
Product Code
30125

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY

Overview

Special Release Agent commonly used for professional and industrial use only.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

N/A

Hazard Classifications

Aerosol Category 1 H222
Pressurised container: May burst if heated. H229
Eye Irrit. Category 2 H319
STOT RE Category 3 H372
STOT SE Category 3 H336
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H372: Causes damage to the central nervous system through prolonged or repeated exposure.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

  • P280: Wear protective gloves / eye protection.
  • P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P312: Call a POISON CENTER/doctor if you feel unwell.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50โ„ƒ/122ยฐF.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P260: Do not breathe spray.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

KENT (United Kingdom) Ltd

manufacturer

๐Ÿ“

Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US

๐ŸŒ

GB

๐Ÿ“ž

+44 01383 723344

๐Ÿ“ 

+44 1383 620079

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+44 01383 723344

๐ŸŒ

GB

๐Ÿ•’

During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mixture of the substances listed below with harmless additions.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Propan-2-ol
EC: 200-661-7
67-63-0 25-50% โš ๏ธ Hazardous
Petroleum gases, liquefied
EC: 270-704-2
68476-85-7 10-50% โš ๏ธ Hazardous
Hydrocarbon, C9-C12, n-alkanes, iso-alkanes, cyclic, aromatics
EC: 919-446-0
N/A 10-25% โš ๏ธ Hazardous
Dipropylene glycol monomethyl ether
EC: 252-104-2
34590-94-8 5-25% โœ“ Non-hazardous

Additional Information

For the wording of the listed hazard phrases refer to section 16.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Supply fresh air; consult doctor in case of symptoms.

๐Ÿ–๏ธ Skin Contact

Instantly wash with water and soap and rinse thoroughly.

Symptoms:

Generally the product is not skin irritating.

๐Ÿ‘๏ธ Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.

๐Ÿฝ๏ธ Ingestion/Swallowing

In case of persistent symptoms consult doctor.

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

โœ… Suitable Extinguishing Media

CO2, extinguishing powder or water haze. Fight larger fires with water haze or alcohol-resistant foam.

โš ๏ธ Specific Fire Hazards

Formation of poisonous gases during heating or in fires.

๐Ÿ›ก๏ธ Firefighter Protection Equipment

Put on breathing apparatus.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

๐Ÿšจ Emergency Procedures

Put on breathing apparatus. Wear protective equipment. Keep unprotected persons away.

๐ŸŒ Environmental Precautions

Inform respective authorities in case product reaches water or sewage system.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Aerosol
Critical Property
๐Ÿ“Š Physical State Data
Not available
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
Colourless
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Aerosol
๐Ÿ‘ƒ Odor
Characteristic
๐Ÿ“Š Odor Threshold
Not determined.
๐Ÿงช Ph
Not available
๐ŸงŠ Melting Point
Not determined
Critical Property
๐Ÿ’จ Boiling Point
Not applicable, as aerosol
Critical Property
๐Ÿ”ฅ Flash Point
11 โ„ƒ
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not applicable.
๐Ÿ’จ Vapor Pressure
Not determined.
๐Ÿ“Š Vapor Density
Not determined.
๐Ÿ“Š Relative Density
Not determined.
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not determined
Critical Property
๐Ÿ”ฅ Flammability
Extremely flammable aerosol. Pressurised container: May burst if heated.
๐Ÿ“Š Upper Explosive Limit
Not determined.
๐Ÿ“Š Lower Explosive Limit
Not determined.
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
Not available
๐Ÿ“Š Decomposition Temperature
Not determined.
๐Ÿ’ง Solubility
Mixture is non-soluble (in water).
๐Ÿ“Š Partition Coefficient
Not determined.
๐Ÿ“Š Solubility In Water
Fully miscible
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Void
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

โš ๏ธ Handling Precautions

โ€ข Ensure good ventilation/exhaustion at the workplace.

โ€ข Keep ignition sources away - Do not smoke.

โ€ข Keep breathing equipment ready.

๐Ÿช Storage Conditions

โ€ข Keep container tightly sealed.

๐Ÿ”ฅ Fire Prevention Measures

Keep ignition sources away - Do not smoke.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

No further data; see item 7.

๐Ÿงค Hand Protection

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

๐Ÿ‘๏ธ Eye Protection

Safety glasses (EN 166)

๐Ÿ˜ท Respiratory Protection

Breathing equipment: Filter A2 / P3 (EN 14387)

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

โœ… Chemical Stability

No decomposition if used according to specifications.

โš ๏ธ Hazardous Reactions

No dangerous reactions known

๐Ÿ’จ Hazardous Decomposition Products

No dangerous decomposition products known

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

๐ŸŒฑ Toxicity

Aquatic toxicity: 67-63-0 Propan-2-ol EC50 (48 hr) 13,299 mg/l (Daphnia magna) LC50 (24 hr) 9,714 mg/l (Daphnia magna) LC50 (96 hr) 4,200 mg/l (FSH) (dynamic) 9,640 mg/l (Pimephales promelas) LOEC (8 days) 1,000 mg/l (Algae) 68476-85-7 Petroleum gases, liquefied (contains less than 0.1 % w/w 1,3-butadiene (EINECS No 203-450-8)). EC50 (96 hr) 12.32 mg/l (Algae) ((Q)SAR calculation method) LC50 (48 hr) 69.43 mg/l (Daphnia magna) ((Q)SAR calculation method) LC50 (96 hr) 49.47 mg/l (Fish) ((Q)SAR calulation method) Hydrocarbon, C9-C12, n-alkanes, iso-alkanes, cyclic, aromatics (2-25%) EC50 (48 hr) <22 mg/l (Daphnia magna) EL50 10-22 (Daphnia magna) (48 Hr) 4.6-10 (Pseudokirchneriella subcapitata) (72 Hr) LC50 (96 hr) <30 mg/l (Oncorhynchus mykiss) LL50 (96 hr) 10-30 mg/l (Oncorhynchus mykiss)

๐ŸŒฑ Persistence and degradability

No further relevant information available.

๐ŸŒฑ Bioaccumulative potential

No further relevant information available.

๐ŸŒฑ Mobility in soil

No further relevant information available.

๐ŸŒฑ Results of PBT and vPvB assessment

PBT: Not applicable. vPvB: Not applicable.

๐ŸŒฑ Endocrine disrupting properties

The product does not contain substances with endocrine disrupting properties.

๐ŸŒฑ Other adverse effects

Remark: Harmful to fish

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

โ™ป๏ธ Waste Treatment Methods

Must not be disposed of together with household garbage. Do not allow product to reach sewage system.

๐Ÿ—‚๏ธ Product Disposal Recommendations

Disposal must be made according to official regulations.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN1950

๐Ÿ“ฆ Proper Shipping Name

AEROSOLS, flammable

โš ๏ธ Transport Hazard Class

2

๐Ÿš› ADR Transport Precautions

Warning: Gases.

Regulatory Information & Compliance

Chemical regulations, safety assessments, and regulatory compliance status

๐Ÿ“‹ Regulatory Summary

None of the ingredients is listed.

โŒ Chemical Safety Assessment

No chemical safety assessment has been performed for this substance.

โ„น๏ธ Additional Regulatory Information

Seveso category P3a FLAMMABLE AEROSOLS. Qualifying quantity (tonnes) for the application of lower-tier requirements 150 t. Qualifying quantity (tonnes) for the application of upper-tier requirements 500 t. Water hazard class: Water danger class 3 (Self-assessment): extremely hazardous for water.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the physical form of Special Release Agent?

Special Release Agent is a aerosol with colourless color. It has characteristic odor.

What is the solubility of Special Release Agent?

Mixture is non-soluble (in water).

What is Special Release Agent used for?

FOR PROFESSIONAL AND INDUSTRIAL USE ONLY

What are the hazard statements for Special Release Agent?

This substance has 6 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. H372: Causes damage to the central nervous system through prolonged or repeated exposure. H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Special Release Agent?

The melting point is Not determined and the boiling point is Not applicable, as aerosol.