NextSDS Logo
Safety Data Sheet EN

Lithium-Ion Rechargeable Battery Pack BL1840B

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lithium-Ion Rechargeable Battery Pack BL1840B

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

M

Makita U.S.A., Inc.

manufacturer

14930-C Northam Street, La Mirada, CA 90638

1-510-657-9881

Emergency Contacts

CHEMTREC

1-800-424-9300

Day or Night

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

EUH029 If battery terminals are in contact with other metals, it may cause heat generation or electrolyte leakage.
H228 Electrolyte is flammable.
In case of electrolyte leakage, move battery from fire immediately.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

The battery pack uses ten US18650VTC4A lithium-ion rechargeable cell and control circuit on the PWB. The cell does not contain metallic lithium or lithium alloy.

Chemical Name CAS Number Concentration Hazardous
Lithium Nickel Cobalt Manganese Oxides 182442-95-1 33% No
Graphite 7782-42-5 17% No
Ethylene Carbonate 623-53-0 3% No
Dimethyl Carbonate 616-38-6 7% No
Lithium Hexafluorophosphate 21324-40-3 2% No
Aluminum 7429-90-5 5% No
Copper 7440-50-8 14% No
Iron 7439-89-6 19% No
Plastic (PC) --- --- No

Enclosure: Plastic (PC) UN number: UN3480 Watt-hour rating: 72Wh for battery pack

Notes

The battery pack should not be opened or burned since the following ingredients contained within the cell could be harmful if exposed or misused.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to a well-ventilated area immediately. Seek medical advice.

Skin contact

Wash the affected areas off immediately with plenty of water and soap.

Symptoms: sores on the skin

Eye contact

Flush eyes immediately with plenty of clean water for at least 15 minutes without rubbing. Seek medical advice.

Symptoms: eye irritation

Immediate Medical Attention

Seek medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use specified extinguishers (gas, foam, powder) and extinguishing system under the Fire Defense Law. Use a large amount of water to create a cooling effect if needed. (Indoor/outdoor fire hydrant)

Specific hazards

Corrosive gas may be produced at the time of fire extinguishing.

Instructions

Remove flammable materials immediately in case of fire. Move batteries to a safe place immediately in case of fire.

Firefighter Protection

Use an air inhalator when danger is predicted.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

Wipe off with dry cloth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not disassemble, remodel, or solder. Do not short + and - terminals with a metal. Do not open the battery pack.

Storage

Store within the recommended limit of -30°C to 45°C (-22°F to 113°F), well-ventilated area. Do not expose to high temperature (60°C/140°F). Since short circuit can cause burn hazard or safety vent to open, do not store with metal jewelry, metal covered tables or metal belt.

Fire prevention

DO NOT INCINERATE.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate ventilation such as a local ventilation system in the storage area.

Hands

safety gloves

Eyes

safety goggles

Respiratory

Gas masks for organic gases

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
---
Relative Density
---
Freezing Point
---
Vapor Density
---
Voc Content
---
Physical State
Lithium-ion rechargeable cells are set in a resin case.
Upper Explosive Limit
---
Solubility In Fat
---
Melting Point
---
Flash Point
---
Ph
---
Auto Ignition Temperature
---
Partition Coefficient
---
Appearance
Lithium-ion rechargeable cells are set in a resin case.
Lower Explosive Limit
---
Dynamic Viscosity
---
Relative Evaporation Rate
---
Decomposition Temperature
---
Cloud Point
---
State Under Standard Conditions
---
Odor
---
Form
---
Solidification Point
---
Colour Intensity
---
Crystallisation Point
---
Evaporation Rate
---
Explosive Limits
---
Kinematic Viscosity
---
Molecular Weight
---
Boiling Point
---
Bulk Density
---
Vapor Pressure
---
Flammability
---
Solubility
---
Softening Point
---
Properties Status
---
Physical State Data
solid
Metal Corrosion
---
Density
---
Odor Threshold
---
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

External short-circuit, deformation by crush, high temperature (over 100°C) exposure

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose in accordance with applicable federal, state and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3480, 3481
Shipping Name
Lithium-ion batteries
Transport Class
9
Packing Group
II
ADR

When batteries are transported by vehicle or railroad, avoid high temperature and condensation. Avoid transportation which may damage package.

IMDG

When batteries are transported by ship, avoid high temperature and condensation. Avoid transportation which may damage package.

IATA

Lithium-ion cells and batteries must be offered for transport at a state of charge not exceeding 30 per cent of their rated capacity. All packages must contain the Cargo Aircraft Only label and Class 9 Label.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lithium-Ion Rechargeable Battery Pack BL1840B?

The signal word is danger.

What is the physical form of Lithium-Ion Rechargeable Battery Pack BL1840B?

Lithium-Ion Rechargeable Battery Pack BL1840B is a lithium-ion rechargeable cells are set in a resin case. appearing as lithium-ion rechargeable cells are set in a resin case. .

What are the hazard statements for Lithium-Ion Rechargeable Battery Pack BL1840B?

This substance has 3 hazard statements:

  • EUH029: If battery terminals are in contact with other metals, it may cause heat generation or electrolyte leakage.
  • H228: Electrolyte is flammable.
  • In case of electrolyte leakage, move battery from fire immediately.